NSN 5306-01-094-0321
Wheel Bolt
Between 2.307 inches and 2.337 inches fastener length, dished hexagon head style, 0.210 inches head height, width between flats: between 0.553 inches and 0.564 inches .
Manufacturer part number 121933-6-30 for national stock number 5306010940321.
Datasheet
-
Product description
Machine Bolt NSN 5306-01-094-0321.
-
MPN or Model
121933-6-30
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093470 - Bolts/nuts I/s -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.447 inches -
Fastener Length
Between 2.307 inches and 2.337 inches -
Head Style
Dished hexagon -
Head Height
0.210 inches -
Width Between Flats
Between 0.553 inches and 0.564 inches -
Thread Diameter
0.375 inches -
Thready Qty Per Inch (tpi)
24 -
Minimum Yield Strength
125000 pounds per square inch -
Material
Stainless steel -
Material Specification
Ams5629 assn standard single material response -
Surface Treatment
Passivate -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-390-0685 MPN 66584-3-15Close Tolerance Screw
- 5305-00-505-2754 MPN LS15266V3-18Close Tolerance Screw
- 5305-00-814-8741 MPN NAS1206-21Close Tolerance Screw
- 5305-00-848-7061 MPN NAS1203-23Close Tolerance Screw
- 5305-00-889-6864 MPN NAS1203-19Close Tolerance Screw
- 5305-01-025-6962 MPN ST3M714-4D15Close Tolerance Screw
- 5305-01-047-6344 MPN HT4011-5-10Shoulder Screw
- 5305-01-111-4202 MPN BACB30LU3P4Close Tolerance Screw
An externally threaded fastener designed for insertion through holes in assembled parts and normally intended to be tightened or released by torquing a nut. the threaded and unthreaded portions are both of one nominal diameter of 0.190 inch (5 mm) or larger. The head is not designed to be held or driven with an inserted driver or by the thumb and fingers. a locking feature may be incorporated in the design of the head or threads. head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. for items having a grip length portion machined to a tolerance of 0.0015 inch (0.038 mm) or less, bolt, shear. See also screw, cap, hexagon head and screw, machine.
Pricing and Availability
Get a quote for 5306-01-094-0321 machine boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
121933-6-30 | Sps Technologies, Llc |
ST3M750-6-30 | Boeing Company, The |
121933-6-30 | Sps Technologies, Llc |