NSN 5306-01-094-2164
Coaxial Connector
Between 4.101 inches and 4.148 inches fastener length, hexagon head style, 0.484 inches head height, width between flats: between 1.239 inches and 1.252 inches .
Manufacturer part number A51B60519-11 for national stock number 5306010942164.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-094-2164.
-
MPN or Model
A51B60519-11
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
2.992 inches -
Fastener Length
Between 4.101 inches and 4.148 inches -
Head Style
Hexagon -
Head Height
0.484 inches -
Width Between Flats
Between 1.239 inches and 1.252 inches -
Grip Diameter
Between 0.8730 inches and 0.8740 inches -
Shank Unthreaded Hole Diameter
0.136 inches first hole and 0.146 inches first hole -
Thread Diameter
0.875 inches -
Grip Length
3.125 inches -
Thready Qty Per Inch (tpi)
14 -
Min. Tensile Strength (psi)
220000 pounds per square inch -
Distance From Head Largest Bearing Surface To Shank Hole Center
3.967 inches first hole and 3.999 inches first hole -
Surface Finish
63.0 microinches bearing surface of head -
Part Name Assigned By Controlling Agency
Navy special project -
Material
Stainless steel -
Material Specification
Ams5844 assn standard single material response -
Thread Series Designator
Unjf
More from these suppliers
- 5985-00-001-8118 MPN 123SCAV5665-1Waveguide Assembly
- 5985-00-005-0208 MPN A51A9052-15Radio Frequency Transmission Line Switch
- 1560-00-064-9381 MPN 128P10530-2Shroud Assembly
- 1560-00-075-0814 MPN 123WM10278-1Hinge Fitting
- 5985-00-115-2987 MPN 128SCAV473-1Waveguide Assembly
- 5985-00-115-2988 MPN 128SCAV474-1Waveguide Assembly
- 5930-00-134-8443 MPN GS3281-2-3CRotary Switch
- 1560-00-148-7559 MPN 123WM10343-511Airfoil Rib
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-094-2164 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
A51B60519-11 | Northrop Grumman Systems Corporation |
A51B60519-11 | Northrop Grumman Systems Corporation |
A51B60519-11 | Sps Technologies, Llc |
A51B60519-11 | Northrop Grumman Systems Corporation |
A51B60519-11 | Northrop Grumman Systems Corporation |