NSN 5306-01-094-2874
Coaxial Connector
0.448 inches fastener length, dished hexagon head style, between 0.110 inches and 0.125 inches head height, width between flats: between 0.367 inches and 0.376 inches .
Manufacturer part number NAS6203L2 for national stock number 5306010942874.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-094-2874.
-
MPN or Model
NAS6203L2
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.323 inches -
Fastener Length
0.448 inches -
Head Style
Dished hexagon -
Head Height
Between 0.110 inches and 0.125 inches -
Width Between Flats
Between 0.367 inches and 0.376 inches -
Grip Diameter
Between 0.1885 inches and 0.1895 inches -
Thread Diameter
0.190 inches -
Grip Length
Between 0.052 inches and 0.072 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Hardness Rating
36.0 rockwell c and 40.0 rockwell c -
Surface Finish
32.0 microinches threads -
Material
Steel comp e4340 -
Surface Treatment
Cadmium and chromate -
Thread Series Designator
Unjf
More from these suppliers
- 5940-01-381-7222 MPN NAS1063B101-120Terminal Board Marker Strip
- 5940-01-451-2675 MPN NAS1063E3-551YTerminal Board Marker Strip
- 1560-01-571-8130 MPN NAS1677D29W37NAir Retaining Strap
- 5305-00-001-6671 MPN NAS1221-06E2Machine Screw
- 5305-00-059-3656 MPN MS51958-60Machine Screw
- 5305-00-060-9820 MPN NAS221C31Machine Screw
- 5305-00-197-2399 MPN MS27039C1-34Machine Screw
- 5305-00-282-8713 MPN NAS222-29Machine Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-094-2874 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS6203L2 | National Aerospace Standards |
NAS6203L2 | C & L Aerospace Pty Ltd |