NSN 5306-01-095-5373
Wheel Bolt
Between 2.293 inches and 2.313 inches fastener length, crowned hexagon head style, between 0.126 inches and 0.141 inches head height, width between flats: 0.488 inches .
Manufacturer part number SS27576-4-30 for national stock number 5306010955373.
Datasheet
-
Product description
Machine Bolt NSN 5306-01-095-5373.
-
MPN or Model
SS27576-4-30
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.418 inches and 0.422 inches -
Fastener Length
Between 2.293 inches and 2.313 inches -
Head Style
Crowned hexagon -
Head Height
Between 0.126 inches and 0.141 inches -
Width Between Flats
0.488 inches -
Thread Diameter
0.250 inches -
Grip Length
Between 1.875 inches and 1.891 inches -
Thready Qty Per Inch (tpi)
28 -
Hardness Rating
36.0 rockwell c and 41.0 rockwell c -
Material
Steel -
Surface Treatment
Cadmium -
Surface Treatment Specification
Qq-p-416, type ii, class 2 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-01-627-5135 MPN JSFB34V6-7Machine Screw
- 5306-00-480-7442 MPN 523514Shoulder Bolt
- 5306-01-025-6434 MPN ST3M453-4-18Close Tolerance Bolt
- 5306-01-646-1942 MPN JSFB24-7-21Close Tolerance Bolt
- 5940-01-569-4602 MPN HS5899-04-208Stud Terminal
- 5305-01-088-7426 MPN CA21089-4-2HSSocket Head Cap Screw
- 5305-01-143-9685 MPN CA21170-3-9Machine Screw
- 5305-01-188-7279 MPN CA2651-3-09Close Tolerance Screw
An externally threaded fastener designed for insertion through holes in assembled parts and normally intended to be tightened or released by torquing a nut. the threaded and unthreaded portions are both of one nominal diameter of 0.190 inch (5 mm) or larger. The head is not designed to be held or driven with an inserted driver or by the thumb and fingers. a locking feature may be incorporated in the design of the head or threads. head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. for items having a grip length portion machined to a tolerance of 0.0015 inch (0.038 mm) or less, bolt, shear. See also screw, cap, hexagon head and screw, machine.
Pricing and Availability
Get a quote for 5306-01-095-5373 machine boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
SS27576-4-30 | Sikorsky Aircraft Corporation |
SS27576-4-30 | M.s. Aerospace Inc. |
ST3M753-8-61 | M.s. Aerospace Inc. |
SS27576-4-30 | Arconic Global Fasteners & Rings, |
SS27576-4-30 | Fastener Technology Corp. |
SS27576-4-30 | Sps Technologies, Llc |
SS27576-4-30 | Sps Technologies, Llc |
SS27576-4-30 | Avibank Mfg., Inc. |