NSN 5306-01-096-1238
Coaxial Connector
1.363 inches fastener length, dished hexagon head style, 0.125 inches head height, width between flats: between 0.430 inches and 0.439 inches .
Manufacturer part number SS5110-04H15 for national stock number 5306010961238.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-096-1238.
-
MPN or Model
SS5110-04H15
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.425 inches -
Fastener Length
1.363 inches -
Head Style
Dished hexagon -
Head Height
0.125 inches -
Width Between Flats
Between 0.430 inches and 0.439 inches -
Hole Diameter
0.046 inches -
Grip Diameter
Between 0.2485 inches and 0.2495 inches -
Thread Diameter
0.250 inches -
Grip Length
0.046 inches -
Hole Quantity
3 -
Hole Type
Drilled -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Hardness Rating
36.0 rockwell c and 40.0 rockwell c -
Hole Configuration Style
Hexagon corners -
Material
Steel -
Material Specification
Mil-b-7838 military specification single material response -
Surface Treatment
Cadmium -
Surface Treatment Specification
Ss8488 mfr ref single treatment response or ams2416 assn standard single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 1560-00-100-3964 MPN 65205-09006-044Pylon Housing Assembly
- 1680-00-128-1428 MPN 65902-01905-041Mcm Tow Control Box
- 1560-00-163-4485 MPN 65201-08049-041Lower Sponson Fitting
- 1560-00-477-9560 MPN S6110-23314-3Cap Assembly
- 1680-00-481-9712 MPN 65407-06027-041Harness And Actuato
- 1560-00-483-0488 MPN S6130-80205-32Oil Tank Assy
- 1560-00-600-9063 MPN 65751-03027-103Armame Cam Follower
- 1560-00-700-2618 MPN S6120-62405-2Bulkhead Fitting
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-096-1238 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
SS5110-04H15 | Sikorsky Aircraft Corporation |