NSN 5306-01-096-5599
Coaxial Connector
3.985 inches fastener length, hexagon head style, 0.250 inches head height, width between flats: between 0.741 inches and 0.752 inches .
Manufacturer part number 70150-09149-104 for national stock number 5306010965599.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-096-5599.
-
MPN or Model
70150-09149-104
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.735 inches -
Fastener Length
3.985 inches -
Head Style
Hexagon -
Head Height
0.250 inches -
Width Between Flats
Between 0.741 inches and 0.752 inches -
Grip Diameter
Between 0.4985 inches and 0.4995 inches -
Thread Diameter
0.500 inches -
Grip Length
3.250 inches -
Thready Qty Per Inch (tpi)
20 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Hardness Rating
36.0 rockwell c and 40.0 rockwell c -
Material
Steel -
Precious Material
Silver -
Surface Treatment
Silver -
Surface Treatment Specification
Ss8487 mfr ref single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 1680-00-171-3403 MPN 65901-01965-102Tow Winch Control
- 1560-00-172-3954 MPN 65200-08008-041Af Sponson Assembly
- 1560-00-303-2590 MPN S1665-61504Servo Unit Plate Assembly
- 1680-00-420-9515 MPN 65407-06005-042Cargo Guard Roller
- 1560-00-700-3788 MPN S6120-62176Door Upper Fitting
- 5935-00-716-6871 MPN C2112Electrical Plug Connector
- 1560-00-828-5986 MPN 65302-12509-103Support Tube Collar
- 1560-00-843-1242 MPN 65205-06004-042Tail Rotor Drive Shaft Cover
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-096-5599 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
70150-09149-104 | Sikorsky Aircraft Corporation |