NSN 5306-01-097-7901
Coaxial Connector
0.887 inches fastener length, double hexagon w/hole head style, between 0.290 inches and 0.310 inches head height, width between flats: between 0.302 inches and 0.322 inches .
Manufacturer part number 579642 for national stock number 5306010977901.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-097-7901.
-
MPN or Model
579642
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.564 inches and 0.584 inches -
Fastener Length
0.887 inches -
Head Style
Double hexagon w/hole -
Head Height
Between 0.290 inches and 0.310 inches -
Width Between Flats
Between 0.302 inches and 0.322 inches -
Extended Washer Diameter
Between 0.428 inches and 0.438 inches -
Extended Washer Thickness
Between 0.059 inches and 0.079 inches -
Grip Diameter
Between 0.2485 inches and 0.2495 inches -
Thread Diameter
0.250 inches -
Grip Length
Between 0.303 inches and 0.323 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
180000 pounds per square inch -
Hardness Rating
39.0 rockwell c and 43.0 rockwell c -
Surface Finish
32.0 microinches grip -
Material
Steel comp e4340 or steel comp 4140 or steel comp 8740 or steel comp 6150 -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416 type 2 class 2 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 4820-00-019-9901 MPN 232794Safety Relief Valve
- 4820-00-506-1287 MPN 2587Valve Disk
- 1680-00-767-3967 MPN 914087Ove Motor Parts Kit
- 4820-01-212-1868 MPN 71439Pilot Valve
- 4820-01-518-8762 MPN F3CG10F30Safety Relief Valve
- 4820-01-643-3551 MPN DPS2-20-P-F-0-160Fluid Pressure Regulating Valve
- 4820-01-651-7827 MPN 3031970-001Check Valve
- 4820-01-227-2770 MPN DG5S-8-2C-2-T-WL-B-10Directional Control Linear Valve
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-097-7901 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
579642 | Eaton Aerospace Llc |