NSN 5306-01-098-3777
Wheel Bolt
Between 4.453 inches and 4.500 inches fastener length, hexagon head style, between 0.234 inches and 0.266 inches head height, width between flats: between 0.615 inches and 0.627 inches .
Manufacturer part number AN7-43A for national stock number 5306010983777.
Datasheet
-
Product description
Machine Bolt NSN 5306-01-098-3777.
-
MPN or Model
AN7-43A
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.625 inches and 0.704 inches -
Fastener Length
Between 4.453 inches and 4.500 inches -
Head Style
Hexagon -
Head Height
Between 0.234 inches and 0.266 inches -
Width Between Flats
Between 0.615 inches and 0.627 inches -
Thread Diameter
0.438 inches -
Grip Length
Between 3.796 inches and 3.828 inches -
Features Provided
Finished head -
Thready Qty Per Inch (tpi)
20 -
Min. Tensile Strength (psi)
125000 pounds per square inch -
Hardness Rating
26.0 rockwell c and 32.0 rockwell c -
Material
Steel comp 4140 or steel comp 8740 or steel comp 8640 or steel comp 8735 or steel comp 4130 or steel comp 4037 -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416 type 2 cl 3 federal specification single treatment response -
Thread Series Designator
Unf
More from these suppliers
- 5935-00-223-0574 MPN AN3057-10Electrical Connector Backshell
- 5940-00-229-7565 MPN AN5539-2Lug Terminal
- 5935-00-258-8959 MPN AN3108A16S1PElectrical Plug Connector
- 5935-00-259-7342 MPN AN3100C28-16SElectrical Receptacle Connector
- 5925-00-104-5761 MPN AN3160-50Circuit Breaker
- 5305-00-013-1885 MPN AN500-6-5Machine Screw
- 5305-00-151-0482 MPN AN501-6-14Machine Screw
- 5305-00-151-2408 MPN AN509-10R32Machine Screw
An externally threaded fastener designed for insertion through holes in assembled parts and normally intended to be tightened or released by torquing a nut. the threaded and unthreaded portions are both of one nominal diameter of 0.190 inch (5 mm) or larger. The head is not designed to be held or driven with an inserted driver or by the thumb and fingers. a locking feature may be incorporated in the design of the head or threads. head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. for items having a grip length portion machined to a tolerance of 0.0015 inch (0.038 mm) or less, bolt, shear. See also screw, cap, hexagon head and screw, machine.
Pricing and Availability
Get a quote for 5306-01-098-3777 machine boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
AN7-43A | Aeronautical Standards Group |