NSN 5306-01-099-1625
Wheel Bolt
Three holes 0.070 in.Min.0.080 in. Max.Dia.Within 0.010 of center of hex. Flat of head.
Manufacturer part number 160D120226-11 for national stock number 5306010991625.
Datasheet
-
Product description
Machine Bolt NSN 5306-01-099-1625.
-
MPN or Model
160D120226-11
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.412 inches and 0.432 inches -
Fastener Length
Between 3.162 inches and 3.182 inches -
Head Style
Hexagon -
Head Height
Between 0.188 inches and 0.203 inches -
Width Between Flats
Between 0.553 inches and 0.564 inches -
Thread Diameter
0.375 inches -
Thready Qty Per Inch (tpi)
24 -
Material
Steel comp 4340 -
Material Specification
5000 military specification single material response -
Surface Treatment
Cadmium -
Surface Treatment Specification
Qq-p-416, type ii, class 2 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5985-00-009-9149 MPN A51A9052-7Radio Frequency Coupler Splitter
- 1560-00-035-4414 MPN 30F88040-1LPilot Ramp Assembly
- 1560-00-047-1997 MPN 89TM1838-1Rudder Flap Hinge
- 5985-00-058-2758 MPN GW810BG1Waveguide Assembly
- 1560-00-089-7909 MPN 128AVP10253-1Aircraft Access Cover
- 5935-00-105-5530 MPN GA800CB2Connector Adapter
- 5930-00-134-8441 MPN GL14A101U4WWWWPush Switch
- 1560-00-232-8037 MPN 1128BP40006-8Fuselage Liner Assy
An externally threaded fastener designed for insertion through holes in assembled parts and normally intended to be tightened or released by torquing a nut. the threaded and unthreaded portions are both of one nominal diameter of 0.190 inch (5 mm) or larger. The head is not designed to be held or driven with an inserted driver or by the thumb and fingers. a locking feature may be incorporated in the design of the head or threads. head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. for items having a grip length portion machined to a tolerance of 0.0015 inch (0.038 mm) or less, bolt, shear. See also screw, cap, hexagon head and screw, machine.
Pricing and Availability
Get a quote for 5306-01-099-1625 machine boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
160D120226-11 | Northrop Grumman Systems Corporation |
160D120226-11 | Northrop Grumman Systems Corporation |