NSN 5306-01-100-3985
Coaxial Connector
1.370 inches fastener length, hexagon head style, between 0.125 inches and 0.140 inches head height, width between flats: between 0.429 inches and 0.439 inches .
Manufacturer part number NAS6204-16 for national stock number 5306011003985.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-100-3985.
-
MPN or Model
NAS6204-16
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.370 inches -
Fastener Length
1.370 inches -
Head Style
Hexagon -
Head Height
Between 0.125 inches and 0.140 inches -
Width Between Flats
Between 0.429 inches and 0.439 inches -
Grip Diameter
Between 0.2485 inches and 0.2495 inches -
Thread Diameter
0.250 inches -
Grip Length
Between 0.990 inches and 1.010 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Hardness Rating
36.0 rockwell c and 40.0 rockwell c -
Material
Steel -
Surface Treatment
Cadmium and chromate -
Thread Series Designator
Unf -
Specification Data
80205-nas6204 professional/industrial association standard
More from these suppliers
- 5940-01-451-4410 MPN NAS1063A20-500AXTerminal Board Marker Strip
- 5940-01-451-4410 MPN NAS1063A20-500AXTerminal Board Marker Strip
- 5305-00-057-0533 MPN NASM51958Machine Screw
- 5305-00-070-3275 MPN NAS1153C12Close Tolerance Screw
- 5305-00-151-6147 MPN MS51959-5BMachine Screw
- 5305-00-170-2942 MPN NAS1580A3H4DClose Tolerance Screw
- 5305-00-184-8297 MPN NAS1102-5-16Machine Screw
- 5305-00-225-8513 MPN MS90725-49Hexagon Head Cap Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-100-3985 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS6204-16 | National Aerospace Standards |
10115715 | Nimikkeistokeskus Ncb Finland |
NAS6204-16 | National Aerospace Standards |
10115715 | Nimikkeistokeskus Ncb Finland |
NAS6204-16 | National Aerospace Standards |
10115715 | Nimikkeistokeskus Ncb Finland |
NAS6204-16 | National Aerospace Standards |
10115715 | Nimikkeistokeskus Ncb Finland |
NAS6204-16 | National Aerospace Standards |
10115715 | Nimikkeistokeskus Ncb Finland |
10115715 | Nimikkeistokeskus Ncb Finland |
NAS6204-16 | National Aerospace Standards |
NAS6204-16 | National Aerospace Standards |
10115715 | Nimikkeistokeskus Ncb Finland |
NAS6204-16 | National Aerospace Standards |
10115715 | Nimikkeistokeskus Ncb Finland |
NAS6204-16 | National Aerospace Standards |
10115715 | Nimikkeistokeskus Ncb Finland |