NSN 5306-01-100-7832
Coaxial Connector
Between 1.080 inches and 1.100 inches fastener length, dished hexagon head style, between 0.134 inches and 0.150 inches head height, width between flats: between 0.367 inches and 0.376 inches .
Manufacturer part number 4048T91P01 for national stock number 5306011007832.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-100-7832.
-
MPN or Model
4048T91P01
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.435 inches and 0.445 inches -
Fastener Length
Between 1.080 inches and 1.100 inches -
Head Style
Dished hexagon -
Head Height
Between 0.134 inches and 0.150 inches -
Width Between Flats
Between 0.367 inches and 0.376 inches -
Thread Diameter
0.190 inches -
Thready Qty Per Inch (tpi)
32 -
Material
Stainless steel -
Material Specification
Ams5731 assn standard single material response -
Thread Series Designator
Unjf
More from these suppliers
- 4820-01-520-3669 MPN 5074T08G01Check Valve
- 4920-01-593-3059 MPN 21C14076P21Aircraft Engine Maintenance Fixture
- 1560-01-632-6116 MPN 3036T57G01Aircraft Structural Component Bracket
- 5306-00-763-4504 MPN 2006T09P01Close Tolerance Bolt
- 6105-01-092-8242 MPN 5020T89G03Motor-tachometer Generator
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-100-7832 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
4048T91P01 | General Electric Company |
Stock Check
- NE: 1654
- NS: 414
- AR: 3
- SV: 1