NSN 5306-01-105-7183
Wheel Bolt
Between 2.015 inches and 2.062 inches fastener length, hexagon head style, between 0.453 inches and 0.485 inches head height, width between flats: between 1.240 inches and 1.253 inches .
Manufacturer part number MS20044-6 for national stock number 5306011057183.
Datasheet
-
Product description
Machine Bolt NSN 5306-01-105-7183.
-
MPN or Model
MS20044-6
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.2 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 1.249 inches and 1.328 inches -
Fastener Length
Between 2.015 inches and 2.062 inches -
Head Style
Hexagon -
Head Height
Between 0.453 inches and 0.485 inches -
Width Between Flats
Between 1.240 inches and 1.253 inches -
Thread Diameter
0.875 inches -
Grip Length
Between 0.734 inches and 0.766 inches -
Features Provided
Finished head -
Thready Qty Per Inch (tpi)
14 -
Min. Tensile Strength (psi)
140000 pounds per square inch -
Hardness Rating
27.0 rockwell c and 37.0 rockwell c -
Surface Finish
63.0 microinches grip -
Material
Stainless steel -
Material Specification
Mil-b-7874 military specification single material response -
Thread Series Designator
Unjf
More from these suppliers
- 5940-01-425-6524 MPN NAS1063A14-402Terminal Board Marker Strip
- 5940-01-660-0089 MPN NAS1063Terminal Board Marker Strip
- 5305-00-006-8141 MPN MS35275-259Machine Screw
- 5305-00-035-5382 MPN NAS1581A3H11Close Tolerance Screw
- 5305-00-054-0000 MPN NAS1352C08H8Socket Head Cap Screw
- 5305-00-081-1737 MPN NAS514P1032-8PMachine Screw
- 5305-00-113-6205 MPN NAS1221-6-12Machine Screw
- 5305-00-150-9211 MPN MILS7839Machine Screw
An externally threaded fastener designed for insertion through holes in assembled parts and normally intended to be tightened or released by torquing a nut. the threaded and unthreaded portions are both of one nominal diameter of 0.190 inch (5 mm) or larger. The head is not designed to be held or driven with an inserted driver or by the thumb and fingers. a locking feature may be incorporated in the design of the head or threads. head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. for items having a grip length portion machined to a tolerance of 0.0015 inch (0.038 mm) or less, bolt, shear. See also screw, cap, hexagon head and screw, machine.
Pricing and Availability
Get a quote for 5306-01-105-7183 machine boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
MS20044-6 | National Aerospace Standards |
MS20044-6 | Military Standards |
Stock Check
- NE: 78
- NS: 1