NSN 5306-01-105-9347
Shouldered Rivet Ring Bolt
About this product
Between 0.190 inches and 0.192 inches eye inside diameter, 0.062 inches shoulder thickness, between 0.766 inches and 0.812 inches shank length, eye stock thickness: between 0.089 inches and 0.099 inches .
Manufacturer part number AN42BC6A for national stock number 5306011059347.
Datasheet
-
Product description
Eye Bolt NSN 5306-01-105-9347.
-
MPN or Model
AN42BC6A
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.391 inches and 0.437 inches -
Eye Inside Diameter
Between 0.190 inches and 0.192 inches -
Shoulder Thickness
0.062 inches -
Shank Length
Between 0.766 inches and 0.812 inches -
Eye Stock Thickness
Between 0.089 inches and 0.099 inches -
Shoulder Diameter
0.438 inches -
Overall Length
Between 1.643 inches and 1.691 inches -
Thread Diameter
0.190 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
125000 pounds per square inch -
Hardness Rating
26.0 rockwell c and 32.0 rockwell c -
Distance From Center Of Eye To Shank End
Between 1.173 inches and 1.221 inches -
Eye Outside Width
0.438 inches -
Material
Steel comp 431 -
Material Specification
Mil-s-18732 military specification single material response -
Surface Treatment
Passivate -
Style Designator
Round, closed w/shoulder -
Thread Series Designator
Unf
More from these suppliers
- 5940-01-425-6518 MPN NAS1063A5-450Terminal Board Marker Strip
- 5940-01-449-7674 MPN NAS1063A12-N1000Terminal Board Marker Strip
- 5940-01-547-0035 MPN NAS1389-2Conductor Splice
- 5305-00-008-5892 MPN NAS1102E08-30Machine Screw
- 5305-00-046-7439 MPN NAS1151C-23Close Tolerance Screw
- 5305-00-051-2333 MPN NASM51958Machine Screw
- 5305-00-057-0508 MPN MS51958-11Machine Screw
- 5305-00-083-4614 MPN NAS1581C3H5PClose Tolerance Screw
Eye Bolt
An externally threaded device whose threaded portion is of one nominal diameter, without a head, but with the unthreaded end either bent more than 225 degrees (3.925 radians) or cast, forged, or punched to resemble an eye. See also bolt, hook. Excludes connector, rod end.
Pricing and Availability
Get a quote for 5306-01-105-9347 eye boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
AN42BC6A | National Aerospace Standards |
AN42BC6A | Aeronautical Standards Group |
Stock Check
Availability of this NSN has not been updated recently. Submit
the pricing and availbility form above to receive an up to date quote.