NSN 5306-01-108-3750
Coaxial Connector
Between 1.277 inches and 1.307 inches fastener length, spline extended washer head style, between 0.302 inches and 0.322 inches head height, extended washer diameter: between 0.575 inches and 0.585 inches .
Manufacturer part number MS21297-05011 for national stock number 5306011083750.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-108-3750.
-
MPN or Model
MS21297-05011
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.579 inches and 0.629 inches -
Fastener Length
Between 1.277 inches and 1.307 inches -
Head Style
Spline extended washer -
Head Height
Between 0.302 inches and 0.322 inches -
Extended Washer Diameter
Between 0.575 inches and 0.585 inches -
Extended Washer Thickness
Between 0.020 inches and 0.050 inches -
Grip Diameter
Between 0.3110 inches and 0.3120 inches -
Head Minor Diameter
Between 0.383 inches and 0.389 inches -
Thread Diameter
0.312 inches -
Grip Length
Between 0.678 inches and 0.698 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
220000 pounds per square inch -
Hardness Rating
46.0 rockwell c and 50.0 rockwell c -
Surface Finish
32.0 microinches grip -
Material
Steel comp h11 -
Material Specification
Ams6487 assn standard single material response -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Mil-c-8837, type 2, class 2 military specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-224-0564 MPN NAS1101-06H8BMachine Screw
- 5305-00-308-1578 MPN AIC811-04-12Socket Head Cap Screw
- 5305-00-934-9873 MPN A1C84-3-7Machine Screw
- 5305-01-149-1940 MPN L-8052-6-5Shoulder Screw
- 5305-01-207-7509 MPN AIC4043-08-15RMachine Screw
- 5305-01-268-8812 MPN LD111-0044-0723Close Tolerance Screw
- 5305-01-284-7158 MPN AIC985-5-22PClose Tolerance Screw
- 5305-01-435-0161 MPN BACB30LU14-45Close Tolerance Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-108-3750 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
MS21297-05011 | Huck International, Inc. |
MS21297-05011 | Sps Technologies, Llc |
MS21297-05011 | Sps Technologies, Llc |
MS21297-05011 | National Aerospace Standards |
MS21297-05011 | Military Standards |
MS21297-05011 | Huck Intl Inc |
Stock Check
- NE: 555
- NS: 291