NSN 5306-01-108-3751
Coaxial Connector
9.780 inches fastener length, double hexagon w/hole head style, 1.434 inches head height, width between flats: 1.625 inches .
Manufacturer part number 13025051 for national stock number 5306011083751.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-108-3751.
-
MPN or Model
13025051
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
6 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
2.010 inches -
Fastener Length
9.780 inches -
Head Style
Double hexagon w/hole -
Head Height
1.434 inches -
Width Between Flats
1.625 inches -
Extended Washer Diameter
2.495 inches -
Extended Washer Thickness
0.335 inches -
Grip Diameter
Between 1.4975 inches and 1.4990 inches -
Thread Diameter
1.500 inches -
Grip Length
7.770 inches -
Thready Qty Per Inch (tpi)
12 -
Min. Tensile Strength (psi)
180000 pounds per square inch -
Material
Steel comp 4140 or steel comp 4340 or steel comp 8740 or steel comp 6150 -
Material Specification
Mil-s-5626 military specification 1st material response or mil-s-5000 military specification 2nd material response or mil-s-6049 military specification 3rd material response or mil-s-8503 military specification 4th material response -
Surface Treatment
Nickel -
Surface Treatment Specification
Mil-c-26074 military specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5930-00-158-5784 MPN 10688436Electronic Switch
- 5935-00-201-7365 MPN 8027567Tip Jack
- 5950-00-230-8572 MPN 10674042Power Transformer
- 5945-00-257-8877 MPN 8176019Thermal Relay
- 5935-00-257-9266 MPN 8107666Electrical Receptacle Connector
- 5905-00-258-2484 MPN 8023341Inductive Wire Wound Fixed Resistor
- 5905-00-259-6229 MPN 8062457Nonprecision Nonwire Wound Variable Resistor
- 5935-00-280-2191 MPN 9006822Electrical Connector Cable Clamp
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-108-3751 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
13025051 | U S Army Aviation And Missile |