NSN 5306-01-108-6827
Close Tolerance Hex Head Bolt
Between 1.203 inches and 1.250 inches fastener length, hexagon head style, between 0.140 inches and 0.172 inches head height, width between flats: between 0.428 inches and 0.440 inches .
Manufacturer part number 3M33-4D12 for national stock number 5306011086827.
Datasheet
-
Product description
Close Tolerance Bolt NSN 5306-01-108-6827.
-
MPN or Model
3M33-4D12
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.469 inches -
Fastener Length
Between 1.203 inches and 1.250 inches -
Head Style
Hexagon -
Head Height
Between 0.140 inches and 0.172 inches -
Width Between Flats
Between 0.428 inches and 0.440 inches -
Grip Diameter
Between 0.2487 inches and 0.2492 inches -
Shank Unthreaded Hole Diameter
0.074 inches first hole and 0.079 inches first hole -
Thread Diameter
0.250 inches -
Grip Length
Between 0.740 inches and 0.760 inches -
Thready Qty Per Inch (tpi)
28 -
Distance From Head Largest Bearing Surface To Shank Hole Center
1.046 inches first hole and 1.078 inches first hole -
Surface Finish
32.0 microinches grip -
Material
Iron alloy 660 -
Material Specification
Ams 5735 assn standard single material response -
Thread Series Designator
Unf
More from these suppliers
- 1560-00-088-1844 MPN 32-21146-6Airfoil Rib
- 1560-00-126-7424 MPN 32-55274-3Sway Brace Pad
- 4920-00-137-0115 MPN MDE323744-3Fixture Collar
- 5975-00-140-9559 MPN 32-75046-2Rigid Metal Conduit Assembly
- 4920-00-161-2090 MPN 0RF53G970671-502TDAircraft Maintenance Fixture
- 4920-00-200-7721 MPN RE168411G00-1Aircraft Maintenance Fixture
- 1560-00-234-0652 MPN 32-32467-131Aircraft Former
- 1560-00-283-8113 MPN 68A113055-2027Chordwise Plate
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.
![Mechanic Bill explains Close Tolerance Hex Head Bolt](/public/images/billy-thinking.png)
Pricing and Availability
Get a quote for 5306-01-108-6827 close tolerance boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
3M33-4D12 | Boeing Company, The |
Stock Check
![](/public/images/partscage_shelf3.png)