NSN 5306-01-112-4351
Close Tolerance Hex Head Bolt
0.460 inches fastener length, undercut hexagon head style, between 0.110 inches and 0.125 inches head height, width between flats: between 0.367 inches and 0.376 inches .
Manufacturer part number 74B450949-2001 for national stock number 5306011124351.
Datasheet
-
Product description
Close Tolerance Bolt NSN 5306-01-112-4351.
-
MPN or Model
74B450949-2001
-
NMF (National Motor Freight)
093470 - Bolts/nuts I/s -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.210 inches -
Fastener Length
0.460 inches -
Head Style
Undercut hexagon -
Head Height
Between 0.110 inches and 0.125 inches -
Width Between Flats
Between 0.367 inches and 0.376 inches -
Hole Diameter
Between 0.070 inches and 0.080 inches -
Grip Diameter
Between 0.1890 inches and 0.1895 inches -
Thread Diameter
0.190 inches -
Grip Length
0.250 inches -
Hole Quantity
3 -
Hole Type
Drilled -
Features Provided
Finished head -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Hole Configuration Style
Hexagon corners -
Material Specification
Ams5731 assn standard single material response or ams5737 assn standard single material response -
Surface Treatment
Passivate -
Thread Series Designator
Unjf -
Specification Data
80205-nas6303 professional/industrial association standard
More from these suppliers
- 4820-01-610-2227 MPN 1168190-109Calibrated Flow Valve
- 5306-01-476-7080 MPN 74A400650-2005Shoulder Bolt
- 1560-00-027-7826 MPN 32-31258-61Aircraft Skin
- 1560-00-078-0791 MPN 32-32080-141Aircraft Access Door
- 1560-00-088-5939 MPN 32-35022-11Windshield Support Arch
- 1560-00-145-5866 MPN 32-35215-29Airframe Cap Strip
- 4920-00-161-6937 MPN CP04K1020Radio Frequency Test Station
- 5985-00-180-4814 MPN 32-87850-81Waveguide Flange
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.
Pricing and Availability
Get a quote for 5306-01-112-4351 close tolerance boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
74B450949-2001 | Boeing Company, The |
74B450949-2001 | All Tools Inc. |
74B450949-2001 | Goodrich Corporation |
1958-C-549 | Goodrich Corporation |
10115741 | Nimikkeistokeskus Ncb Finland |