NSN 5306-01-112-4769
Coaxial Connector
2.062 inches fastener length, hexagon head style, 0.281 inches head height, width between flats: 0.875 inches .
Manufacturer part number NAS464P9-25 for national stock number 5306011124769.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-112-4769.
-
MPN or Model
NAS464P9-25
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.500 inches -
Fastener Length
2.062 inches -
Head Style
Hexagon -
Head Height
0.281 inches -
Width Between Flats
0.875 inches -
Grip Diameter
0.5616 inches -
Thread Diameter
0.562 inches -
Grip Length
1.562 inches -
Thready Qty Per Inch (tpi)
18 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Surface Finish
32.0 microinches grip -
Material
Steel -
Surface Treatment
Cadmium -
Surface Treatment Specification
Qq-p-416 ty ii cl 2 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5940-01-660-0082 MPN NAS1063Terminal Board Marker Strip
- 5940-01-394-5134 MPN NAS707S1Stud Terminal
- 5305-00-005-8111 MPN MS24671-88Socket Head Cap Screw
- 5305-00-008-5881 MPN NAS1101E003Machine Screw
- 5305-00-043-0417 MPN NAS1124-1HClose Tolerance Screw
- 5305-00-051-6751 MPN MS16995-16Socket Head Cap Screw
- 5305-00-053-8082 MPN MS24677-113Socket Head Cap Screw
- 5305-00-058-5145 MPN NAS514P440+12BMachine Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-112-4769 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS464P9-25 | National Aerospace Standards |