1-321-802-5889
Email Us

NSN 5306-01-113-0540

Close Tolerance Hex Head Bolt

About this product

Between 20.70 millimeters and 21.30 millimeters fastener length, undercut hexagon head style, between 2.7 millimeters and 3.0 millimeters head height, width between flats: between 7.85 millimeters and 8.00 millimeters .

Manufacturer part number NA0036-050012 for national stock number 5306011130540.

Picture of NSN 5306-01-113-0540

Datasheet

  • Product description

    Close Tolerance Bolt NSN 5306-01-113-0540.

  • MPN or Model

    NA0036-050012

  • Schedule B
    7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment)
  • NMF (National Motor Freight)
    093486 - Bolts, Nuts Or Screws, NOI (sub 3)
  • Unit Weight (Est.)
    0.1 lb
  • Thread Direction
    Right-hand
  • Thread Length
    Between 8.5 millimeters and 9.5 millimeters
  • Fastener Length
    Between 20.70 millimeters and 21.30 millimeters
  • Head Style
    Undercut hexagon
  • Head Height
    Between 2.7 millimeters and 3.0 millimeters
  • Width Between Flats
    Between 7.85 millimeters and 8.00 millimeters
  • Grip Diameter
    Between 4.9650 millimeters and 4.9900 millimeters
  • Thread Diameter
    5.0 millimeters
  • Grip Length
    Between 11.80 millimeters and 12.20 millimeters
  • Min. Tensile Strength (psi)
    1100 megapascals
  • Hardness Rating
    36.0 rockwell c and 40.0 rockwell c
  • Thread Pitch In Millimeters
    0.8
  • Surface Finish
    0.8 micrometers threads
  • Material
    Steel comp e4340 or steel comp 8740
  • Material Specification
    Mil-s-5000 military specification 1st material response or mil-s-6049 military specification 2nd material response
  • Surface Treatment
    Cadmium and chromate
  • Surface Treatment Specification
    Qq-p-416 type 2 cl 2 federal specification single treatment response
  • Thread Series Designator
    Mj
  • Specification Data
    80205-na0036 professional/industrial association standard
More from these suppliers
Close Tolerance Bolt

An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.

Mechanic Bill explains Close Tolerance Hex Head Bolt

Pricing and Availability

Get a quote for 5306-01-113-0540 close tolerance bolt
Quantity:
Your Email:
Your Name:
Company Name:
Optional reference:
Phone:
NSN 5306011130540

We do not share, sell, or distribute your information to any third party.
Privacy | Terms

All major credit cards accepted as well as gov. p-cards
Manufacturer Part Numbers and Alternates
MPN manufacturer part number Registrant or Supplier
NA0036-050012 National Aerospace Standards
10087872 Nimikkeistokeskus Ncb Finland
Stock Check
Availability for this item was last checked on 08/30/22. The quantities and conditions available at the time were:
  • NS: 16
  • NE: 6934