NSN 5306-01-113-1281
Close Tolerance Hex Head Bolt
Between 23.20 millimeters and 23.80 millimeters fastener length, undercut hexagon head style, between 4.2 millimeters and 4.5 millimeters head height, width between flats: between 12.73 millimeters and 13.00 millimeters .
Manufacturer part number NA0036-080012 for national stock number 5306011131281.
Datasheet
-
Product description
Close Tolerance Bolt NSN 5306-01-113-1281.
-
MPN or Model
NA0036-080012
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Direction
Right-hand -
Thread Length
Between 11.0 millimeters and 12.0 millimeters -
Fastener Length
Between 23.20 millimeters and 23.80 millimeters -
Head Style
Undercut hexagon -
Head Height
Between 4.2 millimeters and 4.5 millimeters -
Width Between Flats
Between 12.73 millimeters and 13.00 millimeters -
Grip Diameter
Between 7.9620 millimeters and 7.9870 millimeters -
Thread Diameter
8.0 millimeters -
Grip Length
Between 11.80 millimeters and 12.20 millimeters -
Min. Tensile Strength (psi)
1100 megapascals -
Hardness Rating
36.0 rockwell c and 40.0 rockwell c -
Thread Pitch In Millimeters
1.0 -
Surface Finish
0.8 micrometers threads -
Material
Steel comp e4340 or steel comp 8740 -
Material Specification
Mil-s-5000 military specification 1st material response or mil-s-6049 military specification 2nd material response -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416 type 2 cl 2 federal specification single treatment response -
Thread Series Designator
Mj -
Specification Data
80205-na0036 professional/industrial association standard
More from these suppliers
- 5305-00-005-5975 MPN NAS1506-13Close Tolerance Screw
- 5305-00-007-9893 MPN NAS1102E04-13Machine Screw
- 5305-00-043-2680 MPN MS24694S97Machine Screw
- 5305-00-053-1080 MPN MS35199-43Machine Screw
- 5305-00-057-0484 MPN MS24694C128Machine Screw
- 5305-00-058-0505 MPN NAS1351-3-10PSocket Head Cap Screw
- 5305-00-081-6298 MPN NAS585-11TMachine Screw
- 5305-00-099-7877 MPN NAS1351-5H16PSocket Head Cap Screw
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.
Pricing and Availability
Get a quote for 5306-01-113-1281 close tolerance boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NA0036-080012 | National Aerospace Standards |
10087879 | Nimikkeistokeskus Ncb Finland |