NSN 5306-01-113-9733
Wheel Bolt
Between 0.928 inches and 0.948 inches fastener length, double hexagon w/hole head style, between 0.365 inches and 0.385 inches head height, width between flats: between 0.367 inches and 0.376 inches .
Manufacturer part number MS21281-11 for national stock number 5306011139733.
Datasheet
-
Product description
Machine Bolt NSN 5306-01-113-9733.
-
MPN or Model
MS21281-11
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.845 inches and 0.948 inches -
Fastener Length
Between 0.928 inches and 0.948 inches -
Head Style
Double hexagon w/hole -
Head Height
Between 0.365 inches and 0.385 inches -
Width Between Flats
Between 0.367 inches and 0.376 inches -
Extended Washer Diameter
Between 0.490 inches and 0.510 inches -
Extended Washer Thickness
Between 0.070 inches and 0.080 inches -
Thread Diameter
0.312 inches -
Features Provided
Finished head -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
130000 pounds per square inch -
Hardness Rating
24.0 rockwell c and 35.0 rockwell c -
Minimum Yield Strength
85000 pounds per square inch -
Surface Finish
63.0 microinches grip -
Material
Iron alloy 660 -
Material Specification
Ams 5732 assn standard single material response -
Thread Series Designator
Unjf
More from these suppliers
- 5935-00-057-9640 MPN MS3114E24-61SElectrical Receptacle Connector
- 5905-00-079-3556 MPN MS35834-405Film Fixed Resistor
- 5935-00-088-2069 MPN MS3110E8-4SWElectrical Receptacle Connector
- 5935-00-149-3259 MPN MS3102A28-9SElectrical Receptacle Connector
- 5935-00-159-0120 MPN MS3418-14CElectrical Connector Backshell
- 5935-00-177-2086 MPN MS24264G18T31PNXElectrical Receptacle Connector
- 5935-00-201-7290 MPN MS27484T22B21SBElectrical Plug Connector
- 5940-00-204-8990 MPN MS85036-111Lug Terminal
An externally threaded fastener designed for insertion through holes in assembled parts and normally intended to be tightened or released by torquing a nut. the threaded and unthreaded portions are both of one nominal diameter of 0.190 inch (5 mm) or larger. The head is not designed to be held or driven with an inserted driver or by the thumb and fingers. a locking feature may be incorporated in the design of the head or threads. head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. for items having a grip length portion machined to a tolerance of 0.0015 inch (0.038 mm) or less, bolt, shear. See also screw, cap, hexagon head and screw, machine.
Pricing and Availability
Get a quote for 5306-01-113-9733 machine boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
MS21281-11 | Military Standards |