NSN 5306-01-114-0615
Close Tolerance Hex Head Bolt
Between 34.20 millimeters and 34.80 millimeters fastener length, hexagon head style, between 4.2 millimeters and 4.5 millimeters head height, width between flats: between 12.7 millimeters and 13.0 millimeters .
Manufacturer part number NA0045-080012 for national stock number 5306011140615.
Datasheet
-
Product description
Close Tolerance Bolt NSN 5306-01-114-0615.
-
MPN or Model
NA0045-080012
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Direction
Right-hand -
Thread Length
Between 22.0 millimeters and 23.0 millimeters -
Fastener Length
Between 34.20 millimeters and 34.80 millimeters -
Head Style
Hexagon -
Head Height
Between 4.2 millimeters and 4.5 millimeters -
Width Between Flats
Between 12.7 millimeters and 13.0 millimeters -
Grip Diameter
Between 7.9720 millimeters and 7.9870 millimeters -
Thread Diameter
8.0 millimeters -
Grip Length
Between 11.80 millimeters and 12.20 millimeters -
Min. Tensile Strength (psi)
1100 megapascals -
Thread Pitch In Millimeters
1.0 -
Surface Finish
0.8 micrometers threads -
Material
Iron alloy 660 -
Material Specification
Ams 5731 assn standard single material response or ams 5732 assn standard single material response or ams 5737 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Mj
More from these suppliers
- 5935-00-410-3996 MPN NAS1667-14Electrical Connector Backshell
- 5940-01-372-2503 MPN NAS1063B-61-80Terminal Board Marker Strip
- 5305-00-007-9882 MPN NAS1100E04-18PMachine Screw
- 5305-00-021-4078 MPN NAS1221-3-3Machine Screw
- 5305-00-052-8900 MPN MS24630-51Tapping Screw
- 5305-00-054-0019 MPN NAS1352C08H12Socket Head Cap Screw
- 5305-00-078-9820 MPN NAS517-3-39Machine Screw
- 5305-00-081-1474 MPN NAS608C832H24Socket Head Cap Screw
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.
Pricing and Availability
Get a quote for 5306-01-114-0615 close tolerance boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NA0045-080012 | National Aerospace Standards |