NSN 5306-01-114-3795
Close Tolerance Hex Head Bolt
Between 2.693 inches and 2.740 inches fastener length, double hexagon head style, between 0.154 inches and 0.174 inches head height, width between flats: between 0.430 inches and 0.439 inches .
Manufacturer part number ST3M453-4-37 for national stock number 5306011143795.
Datasheet
-
Product description
Close Tolerance Bolt NSN 5306-01-114-3795.
-
MPN or Model
ST3M453-4-37
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.371 inches and 0.438 inches -
Fastener Length
Between 2.693 inches and 2.740 inches -
Head Style
Double hexagon -
Head Height
Between 0.154 inches and 0.174 inches -
Width Between Flats
Between 0.430 inches and 0.439 inches -
Grip Diameter
Between 0.2490 inches and 0.2495 inches -
Thread Diameter
0.250 inches -
Grip Length
Between 2.302 inches and 2.322 inches -
Thready Qty Per Inch (tpi)
28 -
Material
Steel -
Material Specification
23-112 fscm 76301 mfr ref single material response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-492-3093 MPN LS15264-08-7Machine Screw
- 5305-00-503-5683 MPN LS15266V3-9Close Tolerance Screw
- 5305-00-505-2772 MPN LS15266V3-21Close Tolerance Screw
- 5305-01-022-9611 MPN LS15264V08-7Machine Screw
- 5305-01-452-1662 MPN LD111-0045-2418Close Tolerance Screw
- 5305-01-629-9065 MPN BACB30LU4-30Close Tolerance Screw
- 5306-00-356-1708 MPN VAL23029-4-23Close Tolerance Bolt
- 5306-00-958-9202 MPN VFK100G-04018Shear Bolt
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.
Pricing and Availability
Get a quote for 5306-01-114-3795 close tolerance boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
ST3M453-4-37 | Boeing Company, The |
BM17019-4-37 | Huck International, Inc. |
VS3204-4-37 | Arconic Global Fasteners & Rings, |
VAL23029-4-37 | Valley-todeco, Inc. |
AIC753-4-37 | Sps Technologies, Llc |
PBF1253-4-37 | Sps Technologies, Llc |
MB61-4-37 | Hi-shear Corporation |
11825-4-37 | Reid Products Inc. |
MB61-4-37 | Lisi Aerospace Canada Corp |
S353-4-37 | Huck Intl Inc |
BM17019-4-37 | Huck Intl Inc |
VS3204-4-37 | Alcoa Global Fasteners, Inc. |
GS1016-4-37 | B & B Specialties Inc. |