NSN 5306-01-114-7958
Coaxial Connector
Between 1.648 inches and 1.695 inches fastener length, double hexagon head style, between 0.177 inches and 0.197 inches head height, width between flats: between 0.492 inches and 0.502 inches .
Manufacturer part number VAL22034-5G21 for national stock number 5306011147958.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-114-7958.
-
MPN or Model
VAL22034-5G21
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.326 inches and 0.393 inches -
Fastener Length
Between 1.648 inches and 1.695 inches -
Head Style
Double hexagon -
Head Height
Between 0.177 inches and 0.197 inches -
Width Between Flats
Between 0.492 inches and 0.502 inches -
Grip Diameter
Between 0.3108 inches and 0.3117 inches -
Thread Diameter
0.312 inches -
Grip Length
Between 1.302 inches and 1.322 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
220000 pounds per square inch -
Hardness Rating
46.0 rockwell c and 50.0 rockwell c -
Surface Finish
32.0 microinches grip -
Material
Steel comp h11 -
Material Specification
Ams 6487 assn standard single material response -
Surface Treatment
Cadmium or cadmium and chromate -
Surface Treatment Specification
Nas 672 assn standard 1st treatment response or mil-c-8837 type 2 class 2 military specification 2nd treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-526-1038 MPN BACB30LU3-5Close Tolerance Screw
- 5305-01-025-6960 MPN ST3M714-4D11Close Tolerance Screw
- 5305-01-338-0921 MPN BACB30NT3R19Close Tolerance Screw
- 5305-01-431-9981 MPN VCL0009-3-4Close Tolerance Screw
- 5305-01-434-0484 MPN 3M1169C4-5AClose Tolerance Screw
- 5306-00-420-6472 MPN VFK100G-06042Shear Bolt
- 5306-01-054-3414 MPN C7521-6-7Shear Bolt
- 5306-01-054-3416 MPN C7521-4-10Shear Bolt
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-114-7958 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
VAL22034-5G21 | Valley-todeco, Inc. |
AIC516B5-21 | Sps Technologies, Llc |
EWSB22D5A21 | Sps Technologies, Llc |
BM17020-5-21A | Huck International, Inc. |
VS3071-5F21 | Arconic Global Fasteners & Rings, |
BM17000-5-21A | Huck International, Inc. |
VS3071-5F21 | Alcoa Global Fasteners, Inc. |
VAL22034-5F21 | Valley-todeco, Inc. |
EWSB22D5A21 | Sps Technologies, Llc |
GB511B5-21 | Sps Technologies, Llc |
GB511B5-21 | Alcoa Global Fasteners, Inc. |
GB511B5-21 | Northrop Grumman Systems Corporation |
BM17020-5-21A | Huck Intl Inc |
H401-5-21 | Huck Intl Inc |