NSN 5306-01-116-1188
Wheel Bolt
Between 5.204 inches and 5.250 inches fastener length, hexagon head style, between 0.234 inches and 0.266 inches head height, width between flats: between 0.615 inches and 0.627 inches .
Manufacturer part number AN7-51A for national stock number 5306011161188.
Datasheet
-
Product description
Machine Bolt NSN 5306-01-116-1188.
-
MPN or Model
AN7-51A
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.626 inches and 0.702 inches -
Fastener Length
Between 5.204 inches and 5.250 inches -
Head Style
Hexagon -
Head Height
Between 0.234 inches and 0.266 inches -
Width Between Flats
Between 0.615 inches and 0.627 inches -
End Application
Spec item -
Thread Diameter
0.438 inches -
Grip Length
Between 4.548 inches and 5.578 inches -
Features Provided
Finished head -
Thready Qty Per Inch (tpi)
20 -
Min. Tensile Strength (psi)
125000 pounds per square inch -
Hardness Rating
26.0 rockwell c and 32.0 rockwell c -
Material
Steel comp 4140 or steel comp 8740 or steel comp 8630 or steel comp 8735 or steel comp 4130 or steel comp 4037 -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416, type 2, class 3 federal specification single treatment response -
Thread Series Designator
Unf
More from these suppliers
- 5935-00-232-5494 MPN AN3102A18-22PElectrical Receptacle Connector
- 5935-00-666-2617 MPN AN3106A20-9SElectrical Plug Connector
- 5935-00-148-9278 MPN UG105UConnector Adapter
- 5925-00-153-4504 MPN AN3160-20Circuit Breaker
- 5305-00-151-3167 MPN AN515-3R10Machine Screw
- 5305-00-151-3570 MPN AN515-3-8Machine Screw
- 5305-00-174-0611 MPN AN500A2-5Machine Screw
- 5305-00-274-0507 MPN AN509-416R7Machine Screw
An externally threaded fastener designed for insertion through holes in assembled parts and normally intended to be tightened or released by torquing a nut. the threaded and unthreaded portions are both of one nominal diameter of 0.190 inch (5 mm) or larger. The head is not designed to be held or driven with an inserted driver or by the thumb and fingers. a locking feature may be incorporated in the design of the head or threads. head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. for items having a grip length portion machined to a tolerance of 0.0015 inch (0.038 mm) or less, bolt, shear. See also screw, cap, hexagon head and screw, machine.
Pricing and Availability
Get a quote for 5306-01-116-1188 machine boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
AN7-51A | Aeronautical Standards Group |
AN7-51A | Aeronautical Standards Group |