NSN 5306-01-117-0647
Shouldered Rivet Ring Bolt
About this product
Between 0.190 inches and 0.192 inches eye inside diameter, 0.062 inches shoulder thickness, between 2.391 inches and 2.437 inches shank length, eye stock thickness: between 0.089 inches and 0.099 inches .
Manufacturer part number AN42B-23 for national stock number 5306011170647.
Datasheet
-
Product description
Eye Bolt NSN 5306-01-117-0647.
-
MPN or Model
AN42B-23
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.391 inches and 0.437 inches -
Eye Inside Diameter
Between 0.190 inches and 0.192 inches -
Shoulder Thickness
0.062 inches -
Shank Length
Between 2.391 inches and 2.437 inches -
Eye Stock Thickness
Between 0.089 inches and 0.099 inches -
Shoulder Diameter
0.438 inches -
Shank Unthreaded Hole Diameter
0.060 inches first hole and 0.080 inches first hole -
Overall Length
Between 3.047 inches and 3.093 inches -
Thread Diameter
0.190 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
125000 pounds per square inch -
Hardness Rating
26.0 rockwell c and 32.0 rockwell c -
Distance From Center Of Eye To Shank End
Between 2.797 inches and 2.843 inches -
Distance From Threaded End To Shank Hole Center
0.110 inches first hole and 0.186 inches first hole -
Eye Outside Width
0.438 inches -
Material
Steel comp 4140 or steel comp 8740 or steel comp 8630 or steel comp 8735 or steel comp 4130 or steel comp 4037 -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416, type 2, class 3 federal specification single treatment response -
Style Designator
Round, closed w/shoulder -
Thread Series Designator
Unf
More from these suppliers
- 4920-01-554-4253 MPN NAS1057T3B-213Aircr Sleeve Spacer
- 5935-00-111-1890 MPN NAS1665-10Electrical Connector Backshell
- 5940-01-451-4410 MPN NAS1063A20-500AXTerminal Board Marker Strip
- 5305-00-007-0282 MPN NAS1100C08-12PMachine Screw
- 5305-00-007-0282 MPN NAS1100E08-12PMachine Screw
- 5305-00-008-2104 MPN NAS1100C02-6PMachine Screw
- 5305-00-008-5905 MPN NAS1189E02T5LSocket Head Cap Screw
- 5305-00-058-9360 MPN MS51977-11Setscrew
Eye Bolt
An externally threaded device whose threaded portion is of one nominal diameter, without a head, but with the unthreaded end either bent more than 225 degrees (3.925 radians) or cast, forged, or punched to resemble an eye. See also bolt, hook. Excludes connector, rod end.
Pricing and Availability
Get a quote for 5306-01-117-0647 eye boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
AN42B-23 | National Aerospace Standards |
AN42B-23 | Aeronautical Standards Group |
Stock Check
Availability of this NSN has not been updated recently. Submit
the pricing and availbility form above to receive an up to date quote.