NSN 5306-01-118-1182
Coaxial Connector
Between 0.923 inches and 0.953 inches fastener length, spline drive shear head head style, 0.187 inches head height, grip diameter: between 0.3108 inches and 0.3117 inches .
Manufacturer part number 120978-5-8 for national stock number 5306011181182.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-118-1182.
-
MPN or Model
120978-5-8
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.413 inches and 0.463 inches -
Fastener Length
Between 0.923 inches and 0.953 inches -
Head Style
Spline drive shear head -
Head Height
0.187 inches -
Grip Diameter
Between 0.3108 inches and 0.3117 inches -
Single Shear Strength
132000 pounds per square inch -
Head Minor Diameter
Between 0.514 inches and 0.521 inches -
Thread Diameter
0.312 inches -
Grip Length
Between 0.490 inches and 0.510 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
220000 pounds per square inch -
Surface Finish
32.0 microinches threads -
Material
Steel comp h11 -
Material Specification
Ams 6487 assn standard single material response -
Surface Treatment
Cadmium -
Surface Treatment Specification
Nas 672 assn standard single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-01-146-3594 MPN ST3M454-5L13Close Tolerance Screw
- 5305-01-249-0460 MPN GB510FG3-2Close Tolerance Screw
- 5305-01-349-4198 MPN VCL0009-8-82Close Tolerance Screw
- 5305-01-629-9065 MPN BACB30LU4-30Close Tolerance Screw
- 5306-00-143-1377 MPN 594383Machine Bolt
- 5306-00-195-2303 MPN MS21250-08044Shear Bolt
- 5306-01-027-1998 MPN VAL23029-5-7Close Tolerance Bolt
- 5306-01-054-3404 MPN VCG0009L6-11Shear Bolt
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-118-1182 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
120978-5-8 | Sps Technologies, Llc |
PBF7521-5-8 | Sps Technologies, Llc |
VCG0009-5-8 | Valley-todeco, Inc. |
C7521-5-8 | Sps Technologies, Llc |
C7521-5-8 | Huck International, Inc. |
C7521-5-8 | Sps Technologies, Llc |
C7521-5-8 | Tactair Fluid Controls, Inc. |
C7521-5-8 | Lockheed Martin Corporation |
C7521-5-8 | Alcoa Global Fasteners, Inc. |