NSN 5306-01-119-1980
Close Tolerance Hex Head Bolt
Between 1.190 inches and 1.210 inches fastener length, between 0.440 inches and 0.460 inches head diameter, between 0.110 inches and 0.130 inches head height, distance from centerline to flat: between 0.110 inches and 0.115 inches .
Manufacturer part number 9146M65P07 for national stock number 5306011191980.
Datasheet
-
Product description
Close Tolerance Bolt NSN 5306-01-119-1980.
-
MPN or Model
9146M65P07
-
Schedule B
7508.90.0000 (Other articles of nickel, nesoi (excluding cloth, grill & netting of nickel wire)) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.620 inches and 0.630 inches -
Fastener Length
Between 1.190 inches and 1.210 inches -
Head Diameter
Between 0.440 inches and 0.460 inches -
Head Height
Between 0.110 inches and 0.130 inches -
Distance From Centerline To Flat
Between 0.110 inches and 0.115 inches -
Grip Diameter
Between 0.2644 inches and 0.2646 inches -
Thread Diameter
0.250 inches -
Grip Length
Between 0.570 inches and 0.580 inches -
Thready Qty Per Inch (tpi)
28 -
Material
Nickel alloy 718 -
Thread Series Designator
Unjf
More from these suppliers
- 4920-00-255-1055 MPN 1C6325G01Aircraft Maintenance Fixture
- 5945-00-260-1509 MPN L10001P4Electromagnetic Relay
- 5935-00-340-9464 MPN 52370Plug-in Electronic Components Socket
- 4920-00-571-7688 MPN 21C1297G001Aircraft Maintenance Fixture
- 4920-00-788-5708 MPN 21C915G002Test Adapter Kit
- 4920-00-874-4604 MPN 1C6404G01Aircraft Maintenance Fixture
- 5905-00-957-4931 MPN R984P1100BInductive Wire Wound Fixed Resistor
- 5975-01-003-9584 MPN 518D547G4Junction Box
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.
Pricing and Availability
Get a quote for 5306-01-119-1980 close tolerance boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
9146M65P07 | General Electric Company |