NSN 5306-01-120-0283
Close Tolerance Hex Head Bolt
Between 27.70 millimeters and 28.30 millimeters fastener length, undercut hexagon head style, between 3.2 millimeters and 3.5 millimeters head height, width between flats: between 9.78 millimeters and 10.0 millimeters .
Manufacturer part number NA0036-060018 for national stock number 5306011200283.
Datasheet
-
Product description
Close Tolerance Bolt NSN 5306-01-120-0283.
-
MPN or Model
NA0036-060018
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Direction
Right-hand -
Thread Length
Between 9.5 millimeters and 10.5 millimeters -
Fastener Length
Between 27.70 millimeters and 28.30 millimeters -
Head Style
Undercut hexagon -
Head Height
Between 3.2 millimeters and 3.5 millimeters -
Width Between Flats
Between 9.78 millimeters and 10.0 millimeters -
Grip Diameter
Between 5.9650 millimeters and 5.9900 millimeters -
Thread Diameter
6.0 millimeters -
Grip Length
Between 17.80 millimeters and 18.20 millimeters -
Min. Tensile Strength (psi)
1100 megapascals -
Hardness Rating
36.0 rockwell c and 40.0 rockwell c -
Thread Pitch In Millimeters
1.0 -
Surface Finish
0.8 micrometers threads -
Material
Steel comp e4340 or steel comp 8740 -
Material Specification
Mil-s-5000 military specification 1st material response or mil-s-6049 military specification 2nd material response -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416, type 2 cl 2 federal specification single treatment response -
Thread Series Designator
Mj -
Specification Data
80205-na0036 professional/industrial association standard
More from these suppliers
- 5940-00-143-4771 MPN MS25036-103Lug Terminal
- 5935-00-502-4359 MPN NAS1666-12Electrical Connector Cable Clamp
- 5940-01-425-7386 MPN NAS1063E4-451Terminal Board Marker Strip
- 5935-01-218-6323 MPN NAS1100C08-8Screw
- 5305-00-007-3020 MPN NAS1102E02-4PMachine Screw
- 5305-00-043-2677 MPN MS24694S94Machine Screw
- 5305-00-065-5798 MPN NAS1154-13Close Tolerance Screw
- 5305-00-088-3819 MPN NAS1631-12Machine Screw
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.
Pricing and Availability
Get a quote for 5306-01-120-0283 close tolerance boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NA0036-060018 | National Aerospace Standards |
10087924 | Nimikkeistokeskus Ncb Finland |