NSN 5306-01-122-0272
Wheel Bolt
Pcp000 locking feature material.
Manufacturer part number 23000118 for national stock number 5306011220272.
Datasheet
-
Product description
Machine Bolt NSN 5306-01-122-0272.
-
MPN or Model
23000118
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Direction
Right-hand -
Thread Length
4.38 millimeters -
Fastener Length
30.0 millimeters -
Head Style
Hexagon -
Head Height
Between 7.24 millimeters and 7.76 millimeters -
Width Between Flats
Between 17.67 millimeters and 18.00 millimeters -
Locking Feature
Patch threads -
Thread Diameter
12.0 millimeters -
Thread Pitch In Millimeters
1.75 -
External Thread Tolerance Class
6gh -
Material
Steel property class 8.8 -
Material Specification
Gm 500-m 8.8 cagec 63005 mfr ref single material response fastener -
Surface Treatment
Phosphate fastener -
Surface Treatment Specification
Gm 4435-m code a cagec 63005 mfr ref single treatment response fastener -
Thread Series Designator
M
More from these suppliers
- 4920-00-923-3194 MPN 6795981Power Turbin Holder
- 5935-01-413-3856 MPN 23073372Electrical Connector Backshell
- 4920-01-474-9964 MPN 23066560Cable Accelerometer
- 4920-01-553-5678 MPN MS3930-180 Aircraft Dowel Pin
- 5975-01-597-9474 MPN 23039462-2Electrical Grounding Plate
- 4920-01-202-7164 MPN S3S13670000Portable Breather Blank
- 4920-01-463-8842 MPN 23089517Thermo Harness Assy
- 5905-01-386-5832 MPN 6847926-2253084Film Fixed Resistor
An externally threaded fastener designed for insertion through holes in assembled parts and normally intended to be tightened or released by torquing a nut. the threaded and unthreaded portions are both of one nominal diameter of 0.190 inch (5 mm) or larger. The head is not designed to be held or driven with an inserted driver or by the thumb and fingers. a locking feature may be incorporated in the design of the head or threads. head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. for items having a grip length portion machined to a tolerance of 0.0015 inch (0.038 mm) or less, bolt, shear. See also screw, cap, hexagon head and screw, machine.
Pricing and Availability
Get a quote for 5306-01-122-0272 machine boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
23000118 | Rolls-royce Corporation |
23000118 | Allison Transmission, Inc. |