1-321-802-5889

NSN 5306-01-122-3198

Close Tolerance Hex Head Bolt

About this product

1.220 inches fastener length, dee chamfer head style, 0.625 inches head diameter, head height: 0.187 inches .

Manufacturer part number 740410773-2001 for national stock number 5306011223198.

Datasheet

  • Product description

    Close Tolerance Bolt NSN 5306-01-122-3198.

  • MPN or Model

    740410773-2001

  • Schedule B
    7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment)
  • NMF (National Motor Freight)
    093486 - Bolts, Nuts Or Screws, NOI (sub 3)
  • Unit Weight (Est.)
    0.1 lb
  • Thread Class
    3a
  • Thread Direction
    Right-hand
  • Thread Length
    Between 0.380 inches and 0.390 inches
  • Fastener Length
    1.220 inches
  • Head Style
    Dee chamfer
  • Head Diameter
    0.625 inches
  • Head Height
    0.187 inches
  • Distance From Centerline To Flat
    0.250 inches
  • Grip Diameter
    Between 0.3740 inches and 0.3750 inches
  • Thread Diameter
    0.375 inches
  • Grip Length
    Between 0.755 inches and 0.765 inches
  • Thready Qty Per Inch (tpi)
    24
  • Min. Tensile Strength (psi)
    280000 pounds per square inch
  • Criticality Code Justification
    Aaur
  • Material
    Steel
  • Material Specification
    Mil-s-8844, cl 3, cond e2 military specification single material response
  • Thread Series Designator
    Unjf
Close Tolerance Bolt

An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.

Mechanic Bill explains Close Tolerance Hex Head Bolt

Pricing and Availability

Get a quote for 5306-01-122-3198 close tolerance bolt
Quantity:
Your Email:
Your Name:
Company Name:
Optional reference:
Phone:
NSN 5306011223198

We do not share, sell, or distribute your information to any third party.
Privacy | Terms

All major credit cards accepted as well as gov. p-cards
Manufacturer Part Numbers and Alternates
MPN manufacturer part number Registrant or Supplier
740410773-2001 Circor Aerospace, Inc.
74A410773-2001 Goodrich Corporation
74A410773-2001 Boeing Company, The
740410773-2001 Safran Landing Systems Canada Inc
740410773-2001 Nassau Tool Works Inc.
740410773-2001 All Tools Inc.
740410773-2001 Magellan Aerospace, New York, Inc.
740410773-2001 Reid Products Inc.
74A410773-2001 Cm Manufacturing, Inc.
10115766 Nimikkeistokeskus Ncb Finland
740410773-2001 Circor Aerospace, Inc.
74A410773-2001 Nassau Tool Works Inc.
74A410773-2001 Safran Landing Systems Canada Inc
74A410773-2001 Reid Products Inc.
74A410773-2001 Magellan Aerospace, New York, Inc.
74A410773-2001 A. J. Associates Manufacturing &
Stock Check
Availability for this item was last checked on 09/05/24. The quantities and conditions available at the time were:
  • NE: 137
  • NS: 1