NSN 5306-01-123-4611
Close Tolerance Hex Head Bolt
With retaining element on shank and two holes spaced ninety degrees apart.
Manufacturer part number SS5115-5-24 for national stock number 5306011234611.
Datasheet
-
Product description
Close Tolerance Bolt NSN 5306-01-123-4611.
-
MPN or Model
SS5115-5-24
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.453 inches and 0.489 inches -
Fastener Length
Between 1.969 inches and 1.989 inches -
Head Style
Dished hexagon -
Head Height
Between 0.157 inches and 0.172 inches -
Width Between Flats
Between 0.492 inches and 0.502 inches -
Grip Diameter
Between 0.3115 inches and 0.3120 inches -
Shank Unthreaded Hole Diameter
0.076 inches all holes and 0.086 inches all holes -
Thread Diameter
0.312 inches -
Grip Length
Between 1.500 inches and 1.516 inches -
Thready Qty Per Inch (tpi)
24 -
Distance From Head Largest Bearing Surface To Shank Hole Center
1.884 inches all holes and 1.914 inches all holes -
Surface Finish
63.0 microinches grip -
Material
Steel comp xm-13 -
Material Specification
Ams5629 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-147-4750 MPN NAS1189E3P14NSocket Head Cap Screw
- 5305-00-281-4535 MPN 16991-3C-8Socket Head Cap Screw
- 5305-00-438-3552 MPN SFT930-4-21Close Tolerance Screw
- 5305-00-590-7745 MPN 20097L96C8Socket Head Cap Screw
- 5305-00-725-7299 MPN 28700L4C6DSetscrew
- 5305-00-838-5448 MPN NAS1101E08-3Machine Screw
- 5305-00-929-1712 MPN NAS1164-8Close Tolerance Screw
- 5305-01-101-6032 MPN HT4068-4-12Close Tolerance Screw
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.
Pricing and Availability
Get a quote for 5306-01-123-4611 close tolerance boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
SS5115-5-24 | Sikorsky Aircraft Corporation |
SS5115-5-24 | Sps Technologies, Llc |
Stock Check
- NE: 10
- NS: 1