NSN 5306-01-123-6359
Close Tolerance Hex Head Bolt
With retaining element on shank and two holes spaced ninety degrees apart.
Manufacturer part number SS5115-4-24 for national stock number 5306011236359.
Datasheet
-
Product description
Close Tolerance Bolt NSN 5306-01-123-6359.
-
MPN or Model
SS5115-4-24
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.429 inches and 0.465 inches -
Fastener Length
Between 1.945 inches and 1.965 inches -
Head Style
Dished hexagon -
Head Height
Between 0.126 inches and 0.141 inches -
Width Between Flats
Between 0.430 inches and 0.439 inches -
Grip Diameter
Between 0.2490 inches and 0.2495 inches -
Shank Unthreaded Hole Diameter
0.076 inches all holes and 0.086 inches all holes -
Thread Diameter
0.250 inches -
Grip Length
Between 1.500 inches and 1.516 inches -
Thready Qty Per Inch (tpi)
28 -
Distance From Head Largest Bearing Surface To Shank Hole Center
0.860 inches all holes and 0.890 inches all holes -
Surface Finish
63.0 microinches grip -
Material
Steel comp xm-13 -
Material Specification
Ams5629 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-061-6759 MPN 67077-08-8Machine Screw
- 5305-00-310-5807 MPN 73573-94-4Socket Head Cap Screw
- 5305-00-429-1796 MPN NAS1133-12Close Tolerance Screw
- 5305-00-753-4305 MPN 38030-3F8CSocket Head Cap Screw
- 5305-00-917-6325 MPN SFT22-3A14Machine Screw
- 5305-01-026-0760 MPN NAS1189E4P8Socket Head Cap Screw
- 5305-01-044-3012 MPN SFH22D6A15Close Tolerance Screw
- 5305-01-046-3963 MPN HT4011-5-16Shoulder Screw
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.
Pricing and Availability
Get a quote for 5306-01-123-6359 close tolerance boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
SS5115-4-24 | Sikorsky Aircraft Corporation |
SS5115-4-24 | Sps Technologies, Llc |
SS515-4-24 | Sps Technologies, Llc |