NSN 5306-01-124-5784
Close Tolerance Hex Head Bolt
With retaining element on shank,two holes spaced ninety degrees apart.
Manufacturer part number SS5115-4-23 for national stock number 5306011245784.
Datasheet
-
Product description
Close Tolerance Bolt NSN 5306-01-124-5784.
-
MPN or Model
SS5115-4-23
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.429 inches and 0.465 inches -
Fastener Length
Between 1.883 inches and 1.903 inches -
Head Style
Dished hexagon -
Head Height
Between 0.126 inches and 0.141 inches -
Width Between Flats
Between 0.430 inches and 0.439 inches -
Grip Diameter
Between 0.2490 inches and 0.2495 inches -
Thread Diameter
0.250 inches -
Grip Length
Between 1.438 inches and 1.454 inches -
Thready Qty Per Inch (tpi)
28 -
Surface Finish
63.0 microinches grip -
Material
Steel comp xm-13 -
Material Specification
Ams5629 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 1680-00-010-9569 MPN S6120-71118-001Windshield Wiper Pivot
- 1560-00-172-3961 MPN 65203-08016-085Aft Panel Assembly
- 5930-00-450-9725 MPN S6170-90143-006Rotary Switch
- 1560-00-458-5591 MPN S6122-82316-6Window Retainer
- 1560-00-558-4821 MPN S6120-62530-31Cable Assembly Guide
- 1560-00-616-4616 MPN 65302-12605-041Panel Assembly
- 1560-00-700-3061 MPN S6120-64107-2Catwalk Panel Assy
- 5930-00-862-9545 MPN S6122-87733-1Sensitive Switch
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.
Pricing and Availability
Get a quote for 5306-01-124-5784 close tolerance boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
SS5115-4-23 | Sikorsky Aircraft Corporation |