NSN 5306-01-125-1193
Coaxial Connector
1.744 inches fastener length, spline drive shear head head style, 0.226 inches head height, grip diameter: between 0.3735 inches and 0.3745 inches .
Manufacturer part number SS5025-06-018 for national stock number 5306011251193.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-125-1193.
-
MPN or Model
SS5025-06-018
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.609 inches and 0.629 inches -
Fastener Length
1.744 inches -
Head Style
Spline drive shear head -
Head Height
0.226 inches -
Grip Diameter
Between 0.3735 inches and 0.3745 inches -
Head Minor Diameter
Between 0.553 inches and 0.564 inches -
Thread Diameter
0.375 inches -
Grip Length
Between 1.115 inches and 1.135 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
180000 pounds per square inch -
Hardness Rating
39.0 rockwell c and 43.0 rockwell c -
Part Name Assigned By Controlling Agency
Navy special project -
Material
Steel -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416 ty2 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 1560-00-072-6991 MPN S6175-65059-10Lock Mechanism Bar
- 1560-00-106-6221 MPN 65500-0023-046Duct Connector Assembly
- 1560-00-171-4814 MPN S6130-80203-5Aircraft Lubricating Oil Tank
- 1560-00-700-3834 MPN S6135-66256-000Disc Cou Jaw Shroud
- 1560-00-895-6046 MPN S6120-61422-013Window Seal Assembly
- 1560-00-915-6967 MPN 65209-09017-107Pylon Latch Block
- 1560-00-915-7702 MPN 65651-03019-103Support Blockxassy
- 1680-00-938-3569 MPN 65503-00014-108Aircraft Seat
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-125-1193 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
SS5025-06-018 | Sikorsky Aircraft Corporation |
SS5025-06-018 | Sikorsky Aircraft Corporation |