NSN 5306-01-125-1203
Close Tolerance Hex Head Bolt
1.670 inches fastener length, double hexagon head style, 0.164 inches head height, width between flats: between 0.430 inches and 0.439 inches .
Manufacturer part number 121933-4-21 for national stock number 5306011251203.
Datasheet
-
Product description
Close Tolerance Bolt NSN 5306-01-125-1203.
-
MPN or Model
121933-4-21
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.358 inches -
Fastener Length
1.670 inches -
Head Style
Double hexagon -
Head Height
0.164 inches -
Width Between Flats
Between 0.430 inches and 0.439 inches -
Grip Diameter
Between 0.2490 inches and 0.2495 inches -
Shank Unthreaded Hole Diameter
0.076 inches first hole and 0.081 inches first hole -
Thread Diameter
0.250 inches -
Grip Length
Between 1.302 inches and 1.322 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
125000 pounds per square inch -
Distance From Head Largest Bearing Surface To Shank Hole Center
1.552 inches first hole -
Material
Stainless steel -
Material Specification
5629 assn standard single material response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-835-3533 MPN NAS1144-5Close Tolerance Screw
- 5305-00-927-0006 MPN NAS1132E4Close Tolerance Screw
- 5305-00-934-0195 MPN 38031-98C-12Socket Head Cap Screw
- 5305-01-014-7273 MPN NAS1189C310NSocket Head Cap Screw
- 5305-01-025-6960 MPN HT4049-4D11Close Tolerance Screw
- 5305-01-056-1512 MPN BACB30LU4-27Close Tolerance Screw
- 5305-01-112-7856 MPN NAS1101E04H4Machine Screw
- 5305-01-130-6555 MPN 123630-3-10Machine Screw
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.
Pricing and Availability
Get a quote for 5306-01-125-1203 close tolerance boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
121933-4-21 | Sps Technologies, Llc |
121933-4-21 | Sps Technologies, Llc |