NSN 5306-01-125-8254
Externally Relieved Body Bolt
Between 2.263 inches and 2.293 inches fastener length, dished hexagon head style, between 0.490 inches and 0.510 inches head height, width between flats: between 0.741 inches and 0.752 inches .
Manufacturer part number 65171-07105-101 for national stock number 5306011258254.
Datasheet
-
Product description
Externally Relieved Body Bolt NSN 5306-01-125-8254.
-
MPN or Model
65171-07105-101
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.434 inches -
Fastener Length
Between 2.263 inches and 2.293 inches -
Head Style
Dished hexagon -
Head Height
Between 0.490 inches and 0.510 inches -
Width Between Flats
Between 0.741 inches and 0.752 inches -
First Diameter From Head
0.499 inches -
Second Diameter From Head
0.499 inches -
Distance From Largest Bearing Surface Of Head To End Of First Diameter
1.750 inches -
Distance From Largest Bearing Surface Of Head To End Of Second Diameter
Between 2.263 inches and 2.293 inches -
Thread Diameter
0.500 inches -
Thready Qty Per Inch (tpi)
20 -
Externally Relieved Body Diameter Quantity
1 -
Material
Steel -
Surface Treatment
Silver -
Thread Series Designator
Unjf
More from these suppliers
- 1560-00-023-9327 MPN 65301-12048-081Cockpit Controls Bracket
- 1560-00-065-6288 MPN S6152-62451-4Cabin Heat Duct
- 1560-00-067-9793 MPN S6132-80147-2Aircraft Structural Component Support
- 1560-00-163-9446 MPN 65208-04031-101Ramp Bumper Pad
- 5930-00-192-3725 MPN 65902-01014-164Switch Subassembly
- 1560-00-468-0796 MPN S1650-61572-19Track Stop
- 1680-00-582-1350 MPN 65653-03037-041Hyd Winc Panel Assy
- 1560-00-711-4577 MPN S14-50-3026Guide
An externally threaded fastener whose threaded portion is of one nominal diameter, and whose unthreaded portion has been machined or ground in one or more places or over its entire length to a maximum diameter less than the minimum pitch diameter of the thread (excludes undercuts for thread relief). It is no. 10 (0.190 in.) (5 mm) or larger in size and has a head which is not designed to be held or driven with an inserted driver or designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. Excludes bolt, internal wrenching and thumbscrew. See also screw, externally relieved body.
Pricing and Availability
Get a quote for 5306-01-125-8254 externally relieved body boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
65171-07105-101 | Sikorsky Aircraft Corporation |