NSN 5306-01-128-8156
Coaxial Connector
6.440 inches fastener length, dished hexagon head style, between 0.188 inches and 0.203 inches head height, width between flats: between 0.553 inches and 0.564 inches .
Manufacturer part number NAS1306-103D for national stock number 5306011288156.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-128-8156.
-
MPN or Model
NAS1306-103D
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.578 inches -
Fastener Length
6.440 inches -
Head Style
Dished hexagon -
Head Height
Between 0.188 inches and 0.203 inches -
Width Between Flats
Between 0.553 inches and 0.564 inches -
Hole Diameter
0.070 inches -
Grip Diameter
0.3730 inches -
End Application
Kc135 -
Thread Diameter
0.375 inches -
Grip Length
5.862 inches -
Hole Quantity
4 -
Hole Type
Drilled -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Hardness Rating
36.0 rockwell c and 40.0 rockwell c -
Hole Configuration Style
Hexagon corners -
Material
Steel -
Surface Treatment
Cadmium -
Thread Series Designator
Unf
More from these suppliers
- 5940-00-069-2414 MPN NAS1745-7Conductor Splice
- 5940-01-451-2679 MPN NAS1063E3-551ETerminal Board Marker Strip
- 1560-01-652-3629 MPN NAS1834-3-750Aircraft Structural Panel
- 4820-01-662-8443 MPN 65C26814-2Valve Cover Plate
- 5305-00-006-4862 MPN NAS1742-04R5Socket Head Cap Screw
- 5305-00-050-6824 MPN MS24677-76Socket Head Cap Screw
- 5305-00-052-6680 MPN MS35198-22Machine Screw
- 5305-00-079-2589 MPN NAS1154-11Close Tolerance Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-128-8156 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1306-103D | National Aerospace Standards |