NSN 5306-01-129-0561
Coaxial Connector
Between 1.992 inches and 2.039 inches fastener length, double hexagon head style, between 0.271 inches and 0.291 inches head height, width between flats: between 0.741 inches and 0.752 inches .
Manufacturer part number VCD0004-8-22F for national stock number 5306011290561.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-129-0561.
-
MPN or Model
VCD0004-8-22F
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.607 inches and 0.674 inches -
Fastener Length
Between 1.992 inches and 2.039 inches -
Head Style
Double hexagon -
Head Height
Between 0.271 inches and 0.291 inches -
Width Between Flats
Between 0.741 inches and 0.752 inches -
Grip Diameter
Between 0.4982 inches and 0.4991 inches -
Thread Diameter
0.500 inches -
Grip Length
Between 1.365 inches and 1.385 inches -
Thready Qty Per Inch (tpi)
20 -
Min. Tensile Strength (psi)
220000 pounds per square inch -
Hardness Rating
46.0 rockwell c and 50.0 rockwell c -
Surface Finish
32.0 microinches grip -
Part Name Assigned By Controlling Agency
Navy special project -
Material
Steel comp h11 -
Material Specification
Ams 6487 assn standard single material response -
Surface Treatment
Cadmium or cadmium and chromate -
Surface Treatment Specification
Nas 672 assn standard 1st treatment response or mil-c-8837 type 2 class 2 military specification 2nd treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-765-3281 MPN BACB30LU4-19Machine Screw
- 5305-01-435-5861 MPN BACB30LU8-66Close Tolerance Screw
- 5305-01-435-6611 MPN BACB30LU9-26Close Tolerance Screw
- 5305-01-512-8359 MPN 3M1170C5-18AClose Tolerance Screw
- 5306-00-205-3521 MPN MS21250-05052Shear Bolt
- 5306-00-883-9244 MPN VFK100G-06036Shear Bolt
- 5306-01-044-5193 MPN VAL23607-5-12Shoulder Bolt
- 5306-01-142-3544 MPN VAL23608-4D7Shoulder Bolt
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-129-0561 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
VCD0004-8-22F | Valley-todeco, Inc. |
AIC558-8-22 | Sps Technologies, Llc |
PBF1290-8-22 | Sps Technologies, Llc |
79894D8-A22 | Sps Technologies, Llc |
VS3244F-8-22 | Alcoa Global Fasteners, Inc. |
BM17035-8-22-A | Huck International, Inc. |
H408F8-22 | Huck International, Inc. |
GB511EB8-22 | Northrop Grumman Systems Corporation |
BM17035-8-22-A | Huck Intl Inc |
H408F8-22 | Huck Intl Inc |
VCD0004-8-22F | Valley-todeco, Inc. |
AIC558-8-22 | Sps Technologies, Llc |
PBF1290-8-22 | Sps Technologies, Llc |
79894D8-A22 | Sps Technologies, Llc |
VS3244F-8-22 | Alcoa Global Fasteners, Inc. |
GB511EB8-22 | Northrop Grumman Systems Corporation |
BM17035-8-22-A | Huck Intl Inc |
H408F8-22 | Huck Intl Inc |