NSN 5306-01-130-9010
Close Tolerance Hex Head Bolt
Retaining element in shank.
Manufacturer part number ST3M764C4-15 for national stock number 5306011309010.
Datasheet
-
Product description
Close Tolerance Bolt NSN 5306-01-130-9010.
-
MPN or Model
ST3M764C4-15
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.344 inches and 0.395 inches -
Fastener Length
Between 1.428 inches and 1.448 inches -
Head Style
Hexagon -
Head Height
Between 0.126 inches and 0.141 inches -
Width Between Flats
Between 0.430 inches and 0.439 inches -
Grip Diameter
Between 0.2487 inches and 0.2492 inches -
Shank Unthreaded Hole Diameter
0.076 inches first hole and 0.086 inches first hole -
Thread Diameter
0.250 inches -
Grip Length
Between 0.938 inches and 0.954 inches -
Thready Qty Per Inch (tpi)
28 -
Distance From Head Largest Bearing Surface To Shank Hole Center
1.329 inches first hole -
Surface Finish
63.0 microinches grip -
Material
Steel comp xm-13 -
Material Specification
Ams 5629 assn standard single material response -
Surface Treatment
Passivate -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-143-3453 MPN P81-1032-4Externally Relieved Body Screw
- 5305-00-293-4997 MPN HT307-4-13Shoulder Screw
- 5305-00-409-9859 MPN HT6V9Close Tolerance Screw
- 5305-00-419-0861 MPN NAS1101-6-10WMachine Screw
- 5305-00-528-4804 MPN HT4N-9Close Tolerance Screw
- 5305-00-541-9045 MPN NAS1221-3-2Machine Screw
- 5305-00-767-3272 MPN 51B220-4Close Tolerance Screw
- 5305-00-952-0970 MPN NAS1203-14WClose Tolerance Screw
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.
Pricing and Availability
Get a quote for 5306-01-130-9010 close tolerance boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
ST3M764C4-15 | Boeing Company, The |
LB36-4-15 | Hi-shear Corporation |
AS300-4-15 | Avibank Mfg., Inc. |
LB36-4-15 | Lisi Aerospace Canada Corp |
LB36C4-15 | Lisi Aerospace Canada Corp |
LB36C4-15 | Hi-shear Corporation |
10115830 | Nimikkeistokeskus Ncb Finland |
Stock Check
- NE: 137
- NS: 5