NSN 5306-01-132-1061
Close Tolerance Hex Head Bolt
Between 2.533 inches and 2.553 inches fastener length, spline drive shear head head style, 0.350 inches head height, width between flats: between 0.970 inches and 0.978 inches .
Manufacturer part number ST3M744-10D32 for national stock number 5306011321061.
Datasheet
-
Product description
Close Tolerance Bolt NSN 5306-01-132-1061.
-
MPN or Model
ST3M744-10D32
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.3 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.523 inches and 0.563 inches -
Fastener Length
Between 2.533 inches and 2.553 inches -
Head Style
Spline drive shear head -
Head Height
0.350 inches -
Width Between Flats
Between 0.970 inches and 0.978 inches -
Grip Diameter
Between 0.6235 inches and 0.6240 inches -
Thread Diameter
0.625 inches -
Grip Length
Between 1.990 inches and 2.010 inches -
Thready Qty Per Inch (tpi)
18 -
Min. Tensile Strength (psi)
125000 pounds per square inch -
Distance From Head Largest Bearing Surface To Shank Hole Center
2.408 inches all holes and 2.438 inches all holes -
Material
Steel comp xm-13 -
Material Specification
Ams5629 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-01-106-2354 MPN 3M926-5L6Close Tolerance Screw
- 5305-01-158-5368 MPN SC2671-06-6Machine Screw
- 5305-01-365-1199 MPN BACB30NN6K44Close Tolerance Screw
- 5306-00-470-8723 MPN STSBG002A08U016Shear Bolt
- 5306-00-503-5693 MPN VAL23611-6D046Close Tolerance Bolt
- 5306-00-960-5306 MPN 871C394P1Internally Relieved Body Bolt
- 5306-01-025-6435 MPN VAL23029-4-13Close Tolerance Bolt
- 5306-01-046-1198 MPN VAL23607-3D20Shoulder Bolt
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.
Pricing and Availability
Get a quote for 5306-01-132-1061 close tolerance boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
ST3M744-10D32 | Boeing Company, The |
ST3M744-10D32 | Heartland Precision Fasteners, Inc. |
PBF1265-10D32 | Sps Technologies, Llc |
VS3174-10D32 | Alcoa Global Fasteners, Inc. |
VCG0001-10D32 | Valley-todeco, Inc. |
AIC687-10D32 | Sps Technologies, Llc |
MB154-10D32 | Hi-shear Corporation |
122895-10D32 | Sps Technologies, Llc |
ST3M744-10D32 | Sps Technologies, Llc |
ST3M744-10D32 | Valley-todeco, Inc. |
ST3M744-10D32 | Arconic Global Fasteners & Rings, |
ST3M744-10D32 | Sps Technologies, Llc |
ST3M744-10D32 | Fastener Innovation Technology, Inc. |
ST3M744-10D32 | Sps Technologies, Llc |
S406-10D32 | Huck Intl Inc |
122895-10D 32 | Sps Technologies Inc |
10115879 | Nimikkeistokeskus Ncb Finland |
GS1015-10D32 | B & B Specialties Inc. |