NSN 5306-01-133-0179
Close Tolerance Hex Head Bolt
Retaining element on shank.
Manufacturer part number MS27576-16-48 for national stock number 5306011330179.
Datasheet
-
Product description
Close Tolerance Bolt NSN 5306-01-133-0179.
-
MPN or Model
MS27576-16-48
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
1.2 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.833 inches and 1.132 inches -
Fastener Length
Between 4.232 inches and 4.252 inches -
Head Style
Dished hexagon -
Head Height
Between 0.501 inches and 0.516 inches -
Width Between Flats
Between 1.427 inches and 1.440 inches -
Grip Diameter
Between 0.9982 inches and 0.9991 inches -
Shank Unthreaded Hole Diameter
0.141 inches first hole and 0.151 inches first hole -
Thread Diameter
1.000 inches -
Grip Length
Between 3.000 inches and 3.016 inches -
Thready Qty Per Inch (tpi)
12 -
Hardness Rating
36.0 rockwell c and 41.0 rockwell c -
Distance From Head Largest Bearing Surface To Shank Hole Center
4.075 inches first hole and 4.105 inches first hole -
Surface Finish
63.0 microinches grip -
Material
Steel comp e4340 or steel comp 4140 or steel comp 8740 or steel comp 4130 or steel comp 6150 -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416, type 2 class 2 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5940-01-430-2097 MPN NAS1063B18-37Terminal Board Marker Strip
- 5305-00-059-8226 MPN MS35214-1Machine Screw
- 5305-00-061-8243 MPN ANSM24693Machine Screw
- 5305-00-115-6128 MPN MS21097-04002Socket Head Cap Screw
- 5305-00-115-9441 MPN NAS1352-02LL6PSocket Head Cap Screw
- 5305-00-144-8446 MPN NAS1146-6Close Tolerance Screw
- 5305-00-151-6201 MPN NAS1096-1-12Machine Screw
- 5305-00-207-8737 MPN NAS336PA17Machine Screw
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.
Pricing and Availability
Get a quote for 5306-01-133-0179 close tolerance boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
MS27576-16-48 | National Aerospace Standards |
AS194-16-48 | Avibank Mfg., Inc. |
MS27576-16-48 | Military Standards |