NSN 5306-01-133-1063
Close Tolerance Hex Head Bolt
Between 1.263 inches and 1.310 inches fastener length, spline drive shear head head style, 0.187 inches head height, grip diameter: between 0.3115 inches and 0.3120 inches .
Manufacturer part number ST3M747-5-13 for national stock number 5306011331063.
Datasheet
-
Product description
Close Tolerance Bolt NSN 5306-01-133-1063.
-
MPN or Model
ST3M747-5-13
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.441 inches and 0.508 inches -
Fastener Length
Between 1.263 inches and 1.310 inches -
Head Style
Spline drive shear head -
Head Height
0.187 inches -
Grip Diameter
Between 0.3115 inches and 0.3120 inches -
Head Minor Diameter
Between 0.514 inches and 0.521 inches -
Thread Diameter
0.312 inches -
Grip Length
Between 0.802 inches and 0.822 inches -
Thready Qty Per Inch (tpi)
24 -
Material
Steel comp xm-13 -
Material Specification
Ams 5629 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-01-027-2005 MPN ST3M652C3-7AClose Tolerance Screw
- 5305-01-069-8911 MPN BACB30LU5P5Close Tolerance Screw
- 5305-01-412-6376 MPN LD111-0045-2414Close Tolerance Screw
- 5305-01-462-2749 MPN 3M1169V6-20AClose Tolerance Screw
- 5305-01-495-9270 MPN 3M1170D4D7AClose Tolerance Screw
- 5305-01-502-6058 MPN 3M1170C3-7AClose Tolerance Screw
- 5306-00-352-0457 MPN VAL23033-4-4Shear Bolt
- 5306-01-025-6434 MPN VAL23029-4-18Close Tolerance Bolt
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.
Pricing and Availability
Get a quote for 5306-01-133-1063 close tolerance boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
ST3M747-5-13 | Boeing Company, The |
S397-5-13 | Huck International, Inc. |
VS3191-5-13 | Arconic Global Fasteners & Rings, |
AIC688-5-13 | Sps Technologies, Llc |
VCG0002-5-13 | Valley-todeco, Inc. |
PBF1266-5-13 | Sps Technologies, Llc |
MB155-5-13 | Hi-shear Corporation |
122896-5-13 | Sps Technologies, Llc |
MB155-5-13 | Lisi Aerospace Canada Corp |
VS3191-5-13 | Alcoa Global Fasteners, Inc. |
HP7747-5-13 | Heartland Precision Fasteners, Inc. |
ST3M747-5-13 | Fastener Innovation Technology, Inc. |
S397-5-13 | Huck Intl Inc |
10115904 | Nimikkeistokeskus Ncb Finland |
GS1031-5-13 | B & B Specialties Inc. |