NSN 5306-01-133-1556
Wheel Bolt
0.375 inches fastener length, double hexagon w/hole head style, 0.260 inches head height, width between flats: between 0.243 inches and 0.251 inches .
Manufacturer part number 69331-3-4 for national stock number 5306011331556.
Datasheet
-
Product description
Machine Bolt NSN 5306-01-133-1556.
-
MPN or Model
69331-3-4
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.313 inches and 0.375 inches -
Fastener Length
0.375 inches -
Head Style
Double hexagon w/hole -
Head Height
0.260 inches -
Width Between Flats
Between 0.243 inches and 0.251 inches -
Extended Washer Diameter
0.375 inches -
Extended Washer Thickness
Between 0.040 inches and 0.050 inches -
Hole Diameter
0.047 inches -
Thread Diameter
0.190 inches -
Hole Quantity
4 -
Hole Type
Drilled -
Features Provided
Finished head -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Minimum Yield Strength
107000 pounds per square inch -
Hole Configuration Style
Round -
Surface Finish
63.0 microinches bearing surface of head -
Material
Iron alloy 660 -
Material Specification
Ams5731 assn standard single material response -
Thread Series Designator
Unjf
More from these suppliers
- 5905-00-431-5148 MPN 5E4720/05-1243Film Fixed Resistor
- 4820-00-509-4607 MPN 98976Special Shaped Actuator Valve Diaphragm
- 4820-00-847-1994 MPN GS546-44Angle Valve
- 5950-00-952-3072 MPN 555526Power Transformer
- 4920-00-994-7551 MPN HS8748Puller
- 5950-00-997-1391 MPN GS2973-21Transformer
- 5945-01-202-5110 MPN 751549-4-1Electrical Solenoid
- 5935-01-268-2938 MPN 796508-16Electrical Plug Connector
An externally threaded fastener designed for insertion through holes in assembled parts and normally intended to be tightened or released by torquing a nut. the threaded and unthreaded portions are both of one nominal diameter of 0.190 inch (5 mm) or larger. The head is not designed to be held or driven with an inserted driver or by the thumb and fingers. a locking feature may be incorporated in the design of the head or threads. head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. for items having a grip length portion machined to a tolerance of 0.0015 inch (0.038 mm) or less, bolt, shear. See also screw, cap, hexagon head and screw, machine.
Pricing and Availability
Get a quote for 5306-01-133-1556 machine boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
69331-3-4 | Hamilton Sundstrand Corporation |