NSN 5306-01-133-5815
Coaxial Connector
Between 0.696 inches and 0.726 inches fastener length, spline extended washer head style, between 0.158 inches and 0.198 inches head height, extended washer diameter: between 0.349 inches and 0.359 inches .
Manufacturer part number 122897-3-5 for national stock number 5306011335815.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-133-5815.
-
MPN or Model
122897-3-5
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.374 inches and 0.424 inches -
Fastener Length
Between 0.696 inches and 0.726 inches -
Head Style
Spline extended washer -
Head Height
Between 0.158 inches and 0.198 inches -
Extended Washer Diameter
Between 0.349 inches and 0.359 inches -
Extended Washer Thickness
Between 0.017 inches and 0.037 inches -
Grip Diameter
Between 0.1890 inches and 0.1895 inches -
Head Minor Diameter
Between 0.253 inches and 0.259 inches -
Thread Diameter
0.190 inches -
Grip Length
Between 0.302 inches and 0.322 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
220000 pounds per square inch -
Material
Steel comp xm-13 -
Material Specification
Ams5629 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-01-015-6646 MPN ST3M454-3L-3Close Tolerance Screw
- 5305-01-101-9436 MPN BACB30LU3-11Close Tolerance Screw
- 5305-01-268-5973 MPN ST3M653C4-10AShoulder Screw
- 5305-01-331-5809 MPN VCL0009-3-10Close Tolerance Screw
- 5305-01-413-2664 MPN VCL0009-5-30Close Tolerance Screw
- 5306-00-528-4945 MPN VAL23029-10D32Close Tolerance Bolt
- 5306-01-012-0624 MPN VAL23001-4D030Shear Bolt
- 5306-01-044-2995 MPN VAL23607-4D27Shoulder Bolt
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-133-5815 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
122897-3-5 | Sps Technologies Inc |
S343-3-5 | Huck International, Inc. |
VS3190-3-5 | Arconic Global Fasteners & Rings, |
HP7753-3-5 | Heartland Precision Fasteners, Inc. |
122897-3-5 | Sps Technologies, Llc |
ST3M753-3-5 | Fastener Innovation Technology, Inc. |
ST3M753-3-5 | Boeing Company, The |
VFK600-3-5 | Valley-todeco, Inc. |
AIC763-3-5 | Sps Technologies, Llc |
122897-3-5 | Sps Technologies, Llc |
PBF1267-3-5 | Sps Technologies, Llc |
MB156-3-5 | Hi-shear Corporation |
MB156-3-5 | Lisi Aerospace Canada Corp |
VS3190-3-5 | Alcoa Global Fasteners, Inc. |
ST3M753-3-5 | Huck International, Inc. |
S343-3-5 | Huck Intl Inc |
10115919 | Nimikkeistokeskus Ncb Finland |