NSN 5306-01-134-5737
Coaxial Connector
Furnished with spacer,washer and tab.
Manufacturer part number SL107-8-12ASP1 for national stock number 5306011345737.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-134-5737.
-
MPN or Model
SL107-8-12ASP1
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.710 inches and 0.760 inches -
Fastener Length
Between 1.470 inches and 1.500 inches -
Head Style
Dished hexagon -
Head Height
Between 0.250 inches and 0.265 inches -
Width Between Flats
Between 0.741 inches and 0.752 inches -
Grip Diameter
Between 0.4985 inches and 0.4995 inches -
Thread Diameter
0.500 inches -
Grip Length
Between 0.740 inches and 0.760 inches -
Thready Qty Per Inch (tpi)
20 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Hardness Rating
36.0 rockwell c and 40.0 rockwell c -
Surface Finish
63.0 microinches grip -
Material
Steel comp e4340 or steel comp 4140 or steel comp 6150 or steel comp 8735 or steel comp 8740 -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416 type 2 class 2 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 1560-00-127-4070 MPN 32-73054-3Wing Pylon Adapter Flange
- 1560-00-137-1342 MPN 32-11359-9Airframe Beam
- 4920-00-200-7728 MPN RE168411600-4Aircraft Maintenance Fixture
- 1560-00-231-2716 MPN 53-11041-35Aircraft Former
- 1560-00-236-4881 MPN 53-65265-1Aircraft Structural Component Support
- 1560-00-262-4513 MPN 68A731056-2003Support Beam Channel
- 1560-00-264-1353 MPN 68A314521-1001Canopy Latch Support
- 1560-00-267-1403 MPN 68A870013-1005Avionic Cooling Duct
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-134-5737 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
SL107-8-12ASP1 | Sps Technologies, Llc |
3M942-8-12A | Boeing Company, The |
AA2105N-8-12 | Aadox Mfg Co Inc |