NSN 5306-01-135-4144
Close Tolerance Hex Head Bolt
Between 0.618 inches and 0.638 inches fastener length, spline drive shear head head style, between 0.154 inches and 0.174 inches head height, grip diameter: between 0.2490 inches and 0.2495 inches .
Manufacturer part number S406-4-5 for national stock number 5306011354144.
Datasheet
-
Product description
Close Tolerance Bolt NSN 5306-01-135-4144.
-
MPN or Model
S406-4-5
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.296 inches and 0.336 inches -
Fastener Length
Between 0.618 inches and 0.638 inches -
Head Style
Spline drive shear head -
Head Height
Between 0.154 inches and 0.174 inches -
Grip Diameter
Between 0.2490 inches and 0.2495 inches -
Head Minor Diameter
Between 0.448 inches and 0.455 inches -
Thread Diameter
0.250 inches -
Grip Length
Between 0.302 inches and 0.322 inches -
Thready Qty Per Inch (tpi)
28 -
Part Name Assigned By Controlling Agency
Navy special project -
Material
Steel comp xm-13 -
Material Specification
Ams 5629 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-354-5143 MPN ST3M455-4L4-1Close Tolerance Screw
- 5305-01-054-4636 MPN BACB30LK3-4Close Tolerance Screw
- 5306-00-060-7930 MPN VAL12001-4Machine Bolt
- 5306-00-111-4165 MPN 9688M01P01Shoulder Bolt
- 5306-01-040-3362 MPN BACB30LJ6DU17Close Tolerance Bolt
- 5306-01-054-3405 MPN C7521-4D5Shear Bolt
- 5306-01-142-2899 MPN VAL23608-4-46Shoulder Bolt
- 5306-01-160-6829 MPN BACB30NE4-15Close Tolerance Bolt
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.
Pricing and Availability
Get a quote for 5306-01-135-4144 close tolerance boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
S406-4-5 | Huck International, Inc. |
ST3M744-4-5 | Arconic Global Fasteners & Rings, |
VS3174-4-5 | Arconic Global Fasteners & Rings, |
VCG0001-4-5 | Valley-todeco, Inc. |
AIC687-4-5 | Sps Technologies, Llc |
PBF1265-4-5 | Sps Technologies, Llc |
MB154-4-5 | Hi-shear Corporation |
122895-4-5 | Sps Technologies, Llc |
MB154-4-5 | Lisi Aerospace Canada Corp |
ST3M744-4-5 | Boeing Company, The |
S406-4-5 | Huck Intl Inc |
ST3M744-4-5 | Alcoa Global Fasteners, Inc. |
VS3174-4-5 | Alcoa Global Fasteners, Inc. |
VCG0001-4-5 | Valley-todeco, Inc. |
AIC687-4-5 | Sps Technologies, Llc |
PBF1265-4-5 | Sps Technologies, Llc |
MB154-4-5 | Hi-shear Corporation |
122895-4-5 | Sps Technologies, Llc |
ST3M744-4-5 | Boeing Company, The |
VS3174-4-5 | Alcoa Global Fasteners, Inc. |
ST3M744-4-5 | Alcoa Global Fasteners, Inc. |