NSN 5306-01-135-7254
Shouldered Rivet Ring Bolt
About this product
Between 0.438 inches and 0.441 inches eye inside diameter, 0.125 inches shoulder thickness, between 1.203 inches and 1.250 inches shank length, eye stock thickness: between 0.308 inches and 0.318 inches .
Manufacturer part number AN48-11A for national stock number 5306011357254.
Datasheet
-
Product description
Eye Bolt NSN 5306-01-135-7254.
-
MPN or Model
AN48-11A
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.749 inches and 0.828 inches -
Eye Inside Diameter
Between 0.438 inches and 0.441 inches -
Shoulder Thickness
0.125 inches -
Shank Length
Between 1.203 inches and 1.250 inches -
Eye Stock Thickness
Between 0.308 inches and 0.318 inches -
Shoulder Diameter
1.000 inches -
Overall Length
Between 2.577 inches and 2.624 inches -
Thread Diameter
0.500 inches -
Thready Qty Per Inch (tpi)
20 -
Min. Tensile Strength (psi)
125000 pounds per square inch -
Hardness Rating
26.0 rockwell c and 32.0 rockwell c -
Distance From Center Of Eye To Shank End
Between 2.015 inches and 2.062 inches -
Eye Outside Width
1.000 inches -
Material
Steel comp 4140 or steel comp 8740 or steel comp 8630 or steel comp 8735 or steel comp 4130 or steel comp 4037 -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416, type 2 class 3 federal specification single treatment response -
Thread Series Designator
Unf
More from these suppliers
- 5940-01-341-7797 MPN NAS1063B-1-5Terminal Board Marker Strip
- 5940-01-408-4280 MPN NAS1063A2-TB107CETerminal Board Marker Strip
- 5305-00-008-9116 MPN NAS1190E04T3LSocket Head Cap Screw
- 5305-00-032-3697 MPN NAS1352-08LL10PSocket Head Cap Screw
- 5305-00-035-5382 MPN NAS1581F3H11Close Tolerance Screw
- 5305-00-206-3686 MPN MILS7839Machine Screw
- 5305-00-207-1786 MPN NAS517-3-12Machine Screw
- 5305-00-213-8894 MPN NAS1102E06-5Machine Screw
Eye Bolt
An externally threaded device whose threaded portion is of one nominal diameter, without a head, but with the unthreaded end either bent more than 225 degrees (3.925 radians) or cast, forged, or punched to resemble an eye. See also bolt, hook. Excludes connector, rod end.
![Mechanic Bill explains Shouldered Rivet Ring Bolt](/public/images/billy-thinking.png)
Pricing and Availability
Get a quote for 5306-01-135-7254 eye boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
AN48-11A | National Aerospace Standards |
AN48-11A | Aeronautical Standards Group |
Stock Check
![](/public/images/partscage_shelf3.png)
Availability of this NSN has not been updated recently. Submit
the pricing and availbility form above to receive an up to date quote.