NSN 5306-01-136-4109
Coaxial Connector
Between 2.049 inches and 2.069 inches fastener length, double hexagon extended washer head style, between 0.373 inches and 0.393 inches head height, width between flats: 0.437 inches .
Manufacturer part number 3043T64P01 for national stock number 5306011364109.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-136-4109.
-
MPN or Model
3043T64P01
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.2 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.794 inches and 0.824 inches -
Fastener Length
Between 2.049 inches and 2.069 inches -
Head Style
Double hexagon extended washer -
Head Height
Between 0.373 inches and 0.393 inches -
Width Between Flats
0.437 inches -
Extended Washer Diameter
Between 0.552 inches and 0.572 inches -
Extended Washer Thickness
Between 0.090 inches and 0.100 inches -
Grip Diameter
0.3750 inches -
Thread Diameter
0.375 inches -
Grip Length
Between 1.245 inches and 1.255 inches -
Thready Qty Per Inch (tpi)
24 -
Surface Finish
125.0 microinches -
Material
Steel -
Thread Series Designator
Unjf
More from these suppliers
- 4920-00-907-9721 MPN CT1708-74Aircraft Maintenance Fixture
- 1680-01-091-7698 MPN 6003T47P02Casing
- 4920-01-143-2727 MPN 17A8543G01Pa Control Assembly
- 1560-01-629-7772 MPN 5030T62P02Aircraft Channel
- 5305-01-104-4823 MPN R1473P004Machine Screw
- 5305-01-495-0576 MPN AS3568-20Machine Screw
- 5905-00-068-3959 MPN 411-9384Nonprecision Wire Wound Variable Resistor
- 5905-00-219-8638 MPN 10120531Film Fixed Resistor
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-136-4109 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
3043T64P01 | General Electric Company |
10115951 | Nimikkeistokeskus Ncb Finland |