NSN 5306-01-136-5335
Close Tolerance Hex Head Bolt
Between 5.118 inches and 5.138 inches fastener length, spline drive shear head head style, 0.164 inches head height, grip diameter: between 0.2490 inches and 0.2495 inches .
Manufacturer part number VCG0001-4D77 for national stock number 5306011365335.
Datasheet
-
Product description
Close Tolerance Bolt NSN 5306-01-136-5335.
-
MPN or Model
VCG0001-4D77
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.2 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.296 inches and 0.336 inches -
Fastener Length
Between 5.118 inches and 5.138 inches -
Head Style
Spline drive shear head -
Head Height
0.164 inches -
Grip Diameter
Between 0.2490 inches and 0.2495 inches -
Shank Unthreaded Hole Diameter
0.076 inches first hole and 0.081 inches first hole -
Head Minor Diameter
Between 0.448 inches and 0.455 inches -
Thread Diameter
0.250 inches -
Grip Length
Between 4.802 inches and 4.822 inches -
Thready Qty Per Inch (tpi)
28 -
Distance From Head Largest Bearing Surface To Shank Hole Center
5.000 inches first hole and 5.030 inches first hole -
Material
Steel comp xm-13 -
Material Specification
Ams 5629 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-01-413-8473 MPN GB510FG7-24Close Tolerance Screw
- 5305-01-462-2749 MPN 3M1169V6-20AClose Tolerance Screw
- 5306-00-935-7528 MPN VFK100G-05028Shear Bolt
- 5306-01-045-5568 MPN VAL23033-4X7Shoulder Bolt
- 5306-01-054-3414 MPN C7521-6-7Shear Bolt
- 5306-01-054-3416 MPN VCG0009-4-10Shear Bolt
- 5306-01-060-6844 MPN C7521-6DN27Close Tolerance Bolt
- 5306-01-142-2898 MPN ST3M507-8D39Shoulder Bolt
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.
Pricing and Availability
Get a quote for 5306-01-136-5335 close tolerance boltManufacturer Part Numbers and Alternates
| MPN manufacturer part number | Registrant or Supplier |
|---|---|
| VCG0001-4D77 | Valley-todeco, Inc. |
| AIC687-4D77 | Sps Technologies, Llc |
| PBF1265-4D77 | Sps Technologies, Llc |
| MB154-4D77 | Hi-shear Corporation |
| ST3M744-4D77 | Boeing Company, The |
| 122895-4D77 | Sps Technologies, Llc |
| VS3174-4D77 | Arconic Global Fasteners & Rings, |
| S406-4D77 | Huck International, Inc. |
| MB154-4D77 | Lisi Aerospace Canada Corp |
| VS3174-4D77 | Alcoa Global Fasteners, Inc. |
| ST3M744-4D77 | Arconic Global Fasteners & Rings, |
| S406-4D77 | Huck Intl Inc |
| 10115954 | Nimikkeistokeskus Ncb Finland |
| ST3M744-4D77 | Alcoa Global Fasteners, Inc. |
| GS1015-4D77 | B & B Specialties Inc. |
Stock Check
